Axiom v2.21 WiN

Team TCD | 13 August 2025 | 89.81 MB

Axiom is a powerful and open multi effects processor and amp simulation software for guitar and bass. Based on the acclaimed Destructor plug-in for amp simulations, Axiom offers an infinite number of exceptional tones for your axe. It includes two amp simulations channels (with pre and post effects) that can be mixed together or used alternatively like a real amp. You can choose your amp models from hundreds of presets or launch the amp editor to build your own, with complete control over the tone. Additional input and master sections let you adjust the tone at the input and the output of Axiom, with 4 additional effect slots each and an integrated high precision tuner. A brickwall limiter also protects the output from overshoot.

DP Meter Pro v4.3.3 WiN MAC

TEAM R2R | 02 October 2024 | WiN: 28 MB | MAC: 193 MB

PLATFORM: WiN32/64:VST/VST3/AAX | MAC:AU/VST/VST3/AAX

DP Meter Pro (DPMP) is a unique audio analysis tool: it combines very flexible and customizable audio meters with advanced side chaining control capabilities thanks to its MIDI and automation outputs. The metering capabilities of the DPMP plug-in let you control and monitor audio signals exactly the way you want: almost every aspect of the peak, RMS and crest factor meters can be customized. It proposes five different scales by default, including Bob Katz’s popular K-System scales (K-12, K-14, K-20), and you can create your own. Large colored statistics displays following your own scales are included for an overview of a track, while histograms give you a precise measurement of the dynamic range of the track. The graphs show the evolution of the audio envelopes over time, and the mid-side switch lets you verify mono compatibility problems and check the “stereoness” of your audio sources very easily. Whether you are working with mono, stereo or surround tracks, this plug-in will fit into your workflow.

Protector v2.3.2 WiN MAC

Team R2R | 30 September 2024 | WiN:14.3MB | OSX:49.8MB

PLATFORM: WiN32/64: VST/VST3/AAX | MAC: AU/VST/VST3/AAX

Protector is a 0 dB stereo brickwall limiter with adjustable dynamics response. It will typically find its place on the master bus of your DAW to protect your audio output from overshoot, limit the general volume and improve the perceived loudness, thanks to a very transparent frequency response. Despite its very simple set of controls, it offers a wide range of sounds and it is also suitable as a track limiter for more creative effects such as distortion, pumping or heavy limiting. Its large colorful meters and its custom dynamics histogram provide premium visual feedback and make it the perfect tool to monitor and control the dynamics on your master buss. You can also check in real time the loudness boost obtained with the limiter.

Destructor v1.62 WiN MAC

Team R2R | 12 September 2024 | WiN: 32.8MB | OSX: 129.3MB

..: AU, AAX, RTAS, VST3, VST, x86, x64 :..

Destructor is a powerful distortion and amp sim modeling tool capable of simulating any kind of distortion: from harsh digital destruction to smooth compression or guitar amp simulation (works for clean tones too.), and most importantly, yours. It is delivered with hundreds of presets and predefined models, either inspired by existing gear (guitar & bass amps or cabinets, compressors, pedals, tape machines…) or created by our destructive minds. But the plug-in is not limited to these predefined models: all parameters of existing presets are fully editable, which gives you access to an unlimited number of distortion simulations – no need to purchase extra presets or amp models to build your custom tone. Based on a perceptual model rather than on electronic designs or impulse responses, the signal chain is reduced to its bare minimum, simplifying the process of tweaking the tone and making it fit into the mix.

MB-7 Mixer 3 v3.60 WiN MAC

Team R2R | 12 September 2024 | WiN: 66.7MB | MAC: 618.9MB

WiN32/64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

MB-7 Mixer is a unique plug-in that splits the signal into several frequency bands and lets you mix and process them as if they were separate tracks. Each band proposes controls that can be found on a mixing console, and more: bypass, mute or solo each band separately to isolate frequencies you want to work on, adjust the gain, the “stereoness” and the position in the stereo field. When manipulating the stereo image, a master mono switch also lets you check mono compatibility. The plug-in can also operate as a multiband VST and Audio Unit host: you can process each band independently with your favorite VST or Audio Unit plug-ins! Up to four plug-ins can be loaded on each band, pre or post fader. Latency compensation, presets management, undo/redo integration, and individual plug-in bypass are included for optimal operation. The plug-in also proposes unique linking and grouping options thanks to our multi-instances technology. You can link bands together within a single instance or between several instances of the plug-in on different tracks. This lets a simple fader control as many bands on as many tracks as you want. This is particularly useful when adjusting the placement or the balance of several

MB-5 Dynamix v1.21 MAC

KLEEN | 16 December 2015 | 50 MB

…: AU, VST, RTAS :…

Blue Cat’s MB-5 Dynamix is an extremely powerful all-in-one multiband dynamics processor: it can be used as a multiband compressor, limiter, gate, expander, waveshaper or all combined at once, on any part of the spectrum. The unique dynamics processing section of the Blue Cat’s Dynamics plug-in has been streamlined and integrated in this plug-in to process each one of the 5 bands separately. The plug-in provides unique envelope detection capabilities that let one band trigger the dynamics response on others (internal side-chain). Combined with the advanced stereo features including mid/side processing and independent channels activation, it gives you full control over the dynamics of the signal for a wide range of effects. An additional brick wall limiter/clipper protects the output for complete control over the dynamics response. The plug-in provides comprehensive visual feedback to let you know what’s exactly going on at every step of the dynamics processor: for each channel, monitor the spectrum, the in/out levels, dynamics response, compression ratio and in/out level of each band…

Blue Cats Connector v1.12 WiN MAC

Team R2R | 12 March 2023 | WiN: 14.0MB | MAC: 66.1MB

.: AU/VST/VST3/AAX/x86/x64 :.

Cats Connector is an audio & MIDI streaming plug-in that can be used to transmit audio and MIDI signals in real time between several computers or applications, or create your own routings within a single application, with minimal latency. Have you ever dreamt to overcome the limitations of your favorite DAW and draw virtual audio and MIDI cables between any places that accept plug-ins? Have you ever been frustrated not to be able to create feedback loops with plug-ins? What about connecting multiple applications together, on different computers? The wait is over! Blue Cat’s Connector lets you do all of this, and more! It can stream audio and MIDI data in real time, between any locations that accepts plug-ins: one or several applications, on one or several machines connected to a network.