Our website is made possible by displaying online advertisements to our visitors.
Please consider supporting us by disabling your ad blocker.
MaGeSY ® R-EVOLUTiON™⭐⭐⭐

  • Destructor v1.62 WiN MAC-R2R
    September 12th, 2024 ⚡

    Destructor v1.62 WiN MAC-R2R

    Destructor v1.62 WiN MAC

    Team R2R | 12 September 2024 | WiN: 32.8MB | OSX: 129.3MB

    ..: AU, AAX, RTAS, VST3, VST, x86, x64 :..

    Destructor is a powerful distortion and amp sim modeling tool capable of simulating any kind of distortion: from harsh digital destruction to smooth compression or guitar amp simulation (works for clean tones too.), and most importantly, yours. It is delivered with hundreds of presets and predefined models, either inspired by existing gear (guitar & bass amps or cabinets, compressors, pedals, tape machines…) or created by our destructive minds. But the plug-in is not limited to these predefined models: all parameters of existing presets are fully editable, which gives you access to an unlimited number of distortion simulations – no need to purchase extra presets or amp models to build your custom tone. Based on a perceptual model rather than on electronic designs or impulse responses, the signal chain is reduced to its bare minimum, simplifying the process of tweaking the tone and making it fit into the mix.


    Viewed 9172 By Music Producers & DJ´s.


  • MB-7 Mixer 3 v3.60 WiN MAC-R2R
    September 12th, 2024 ⚡
    Categories:

    MB-7 Mixer 3 v3.60 WiN MAC-R2R

    MB-7 Mixer 3 v3.60 WiN MAC

    Team R2R | 12 September 2024 | WiN: 66.7MB | MAC: 618.9MB

    WiN32/64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

    MB-7 Mixer is a unique plug-in that splits the signal into several frequency bands and lets you mix and process them as if they were separate tracks. Each band proposes controls that can be found on a mixing console, and more: bypass, mute or solo each band separately to isolate frequencies you want to work on, adjust the gain, the “stereoness” and the position in the stereo field. When manipulating the stereo image, a master mono switch also lets you check mono compatibility. The plug-in can also operate as a multiband VST and Audio Unit host: you can process each band independently with your favorite VST or Audio Unit plug-ins! Up to four plug-ins can be loaded on each band, pre or post fader. Latency compensation, presets management, undo/redo integration, and individual plug-in bypass are included for optimal operation. The plug-in also proposes unique linking and grouping options thanks to our multi-instances technology. You can link bands together within a single instance or between several instances of the plug-in on different tracks. This lets a simple fader control as many bands on as many tracks as you want. This is particularly useful when adjusting the placement or the balance of several


    Viewed 48041 By Music Producers & DJ´s.


  • Blue Cats All Plug-Ins Pack 2024.09 WiN CE-V.R

    B.C. All Plug-Ins Pack 2024.09 WiN

    Team V.R | 12 September 2024 | 398 MB

    (Win32/64; AAX*, RTAS, VST3, VST, STANDALONE)

    A complete professional digital audio processing environment in a single bundle: the BC PatchWork standalone application and the complete collection of BCs commercial audio plug-ins: a total of 18 plugins, including 6 award-winning unique audio analysis tools, 3 powerful dynamics processors, 4 premium equalizers, and a unique scripting plug-in to build your own effects or virtual instruments.


    Viewed 50090 By Music Producers & DJ´s.


  • PatchWork v2.68 x64 WiN-TCD

    PatchWork v2.68 WiN

    TCD | 06 July 2024 | 179MB

    WiN64 – EXE/VST/VST3/AAX

    “The virtual patchbay for audio plug-ins”

    PatchWork is a universal plug-ins patchbay that can host up to 64 VST plug-ins into any Digital Audio Workstation (DAW) in one instance. It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently. This lets you create your favorite effects or instruments configurations within the plug-in, without the need for multiple busses. These configurations can be saved as presets and recalled instantly, or shared with multiple DAWs, using any plug-in format (full list below). Despite the name, you can forget about wires or cables: configuring plug-ins routing is as simple as adding or removing a row or a column in the rack’s matrix.


    Viewed 11101 By Music Producers & DJ´s.


  • Blue Cat Audio Mb 5 Dynamix V1.21 Macos Kleen

    MB-5 Dynamix v1.21 MAC

    KLEEN | 16 December 2015 | 50 MB

    …: AU, VST, RTAS :…

    Blue Cat’s MB-5 Dynamix is an extremely powerful all-in-one multiband dynamics processor: it can be used as a multiband compressor, limiter, gate, expander, waveshaper or all combined at once, on any part of the spectrum. The unique dynamics processing section of the Blue Cat’s Dynamics plug-in has been streamlined and integrated in this plug-in to process each one of the 5 bands separately. The plug-in provides unique envelope detection capabilities that let one band trigger the dynamics response on others (internal side-chain). Combined with the advanced stereo features including mid/side processing and independent channels activation, it gives you full control over the dynamics of the signal for a wide range of effects. An additional brick wall limiter/clipper protects the output for complete control over the dynamics response. The plug-in provides comprehensive visual feedback to let you know what’s exactly going on at every step of the dynamics processor: for each channel, monitor the spectrum, the in/out levels, dynamics response, compression ratio and in/out level of each band…


    Viewed 12140 By Music Producers & DJ´s.


  • Blue Cat Axiom Explained® TUTORiAL-FANTASTiC

    Blue Cat Axiom Explained®

    FANTASTiC | 03 September 2021 | 186 MB

    Metal maven presents in-depth Blue Cat Axiom video tutorials! If you want to learn how to achieve stellar guitar tones with Blue Cat Audio’s killer amp sim plugin, this is the video series for you. Gary walks you through the plugin’s formidable feature set from top to bottom, demonstrating along the way all the different methods you can use to customize and tailor your sound like never before. These videos are for new Axiom users. Gary welcomes you and begins by introducing you to the plugin’s interface, explaining how to setup your audio interface, connect your instrument, and use the built-in tuner. You’ll then learn how to choose between the dozens of amp and speaker models, how to combine them, and how to recall a preset for instant tone-switching. Then you’ll learn how to add effects in both Pre (before amp) and Post (after amp) sections, including tips on which types of effects generally sound best in each.


    Viewed 967 By Music Producers & DJ´s.


  • image

    Blue Cat Plugins-Bundle 2018.10-2 WiN

    Team V.R | 22 October 2018 | 254 MB

    (Win32/64; AAX*, RTAS, VST3, VST, STANDALONE)

    A complete professional digital audio processing environment in a single bundle: the Blue Cat’s PatchWork standalone application and the complete collection of Blue Cat Audio’s commercial audio plug-ins: a total of 20 products, including 6 award-winning unique audio analysis tools, 3 powerful dynamics processors, 4 premium equalizers, and a unique scripting plug-in to build your own effects or virtual instruments.


    Viewed 3483 By Music Producers & DJ´s.


1 2 Next

MaGeSY TeleGram Subscribe & Stay up to date with all the Posts that are published in MaGeSY MaGeSY Podcast: Subscribe & Stay up to date with all the Audio Posts that are published in MaGeSY MaGeSY Instagram Official MaGeSY-Youtube Official MaGeSY-X Official MaGeSY-Facebook Official MaGeSY-Pinterest Official MaGeSY-WhatsApp Channel Official

With Adblocker the page loads slower & avoid enhanced new search




ಮ್ಯಾಜೆಸ್ಯ್