StepicVST WiN MAC

MOCHA | 29 July 2022 | 57.7 MB

Step and Modulation Sequencer Powerhouse

StepicVST isn’t just a powerful and versatile polyphonic step sequencer. 8 additional and fully integrated modulation sequencers make it a true sound shaping tool. Use them to automate any parameter (e.g. Filter Cutoff, Wavetable Position, Effect Amount) of your favorite synthesizers or effect devices. With its support for MIDI CC, StepicVST offers you parameter control for both software plug-ins and hardware devices. By assigning different tempos and sequence lengths to the modulation sequencers, StepicVST lets you create deep, polyrhythmic parameter progressions that add a lot of motion and uniqueness to your sound. And if that’s not enough, bring the 200+ random generators into play ;-)

VUMT deluxe v2.5.2 WiN MAC

P2P | 9 May 2022 | 74.04 MB

.: AU, AAX, VST, STANDALONE, x86, x64 :.

VU, RMS and PPM DIN (Type I) /BBC, DIN, Nordic

In addition to all the features of the standard version VUMT deluxe offers more metering types (BBC, DIN, Nordic) plus various channel tools, such as Mute and Polarity reverse buttons, a monitor section and the following signal processing tools: HighPass and LowPass Filters, a single band dynamic EQ with various filter types, useful to remove resonances or for de-essing and a mono maker to narrow the stereo image below a certain frequency. On top of that, each skin VUMT deluxe offers an additional contrasting GUI for the VU itself.

dpMeterXT3 v3.0.10 WiN MAC

Team R2R | 2022.04.06 | 11.57 MB

PLATFORM: AU/VST/VST3/AAX/x86/x64

dpMeterXT is a loudness metering plugin and application fully compliant with the EBU R128-2014, ITU-R BS.1770-4, ATSC A/85 and several other regionspecific loudness standards. dpMeterXT supports multiple channel configurations, from 1.0 up to 9.1/10.0, depending on your system configuration or DAW capabilities. dpMeterXT is a loudness metering plugin and application fully compliant with the EBU R128-2014, ITU-R BS.1770-4, ATSC A/85 and several other regionspecific loudness standards. dpMeterXT supports multiple channel configurations, from 1.0 up to 9.1/10.0, depending on your system configuration or DAW capabilities.EBUR128 It features large readouts, meters, graphs, loudness/peak prediction, measurement history and datalogging. With dpMeterXT, you can define the measurement parameters in a very detailed way (i.a. integration time, gating levels, filter).

DynaRide2 v2.0.10 WiN MAC

Team R2R | 2022.04.06 | 19.77 MB

PLATFORM: AU/VST/VST3/AAX/x86/x64

DynaRide is an advanced gain rider plug-in with multiple detector programs, side chain support and switchable pre-delay. On top of it DynaRide can enhance the output signal by limiting the riding process to specific audio signals like speech, vocal and bass. On top of it DynaRide can enhance the output signal by limiting the riding process to specific audio signals like speech, vocal and bass. DynaRide offers several detector modes designed for special tasks like dialog, vocal or bass riding. Additionally the riding process can be enhanced by focusing to specific audio signals like speech, vocal and bass.

Euphonia3 v3.0.11 WiN MAC

Team R2R | 2022.04.06 | 14.54 MB

PLATFORM: AU/VST/VST3/AAX/x86/x64

Euphonia is an optimal audio spectrum balancing plugin which equalizes automatically any audio input based on a few standard average spectrum curves. Using Euphonia right after the final mix of your music production could eliminate missing low/high end, mixing mistakes, general spectrum balancing problems or even compensate poor listening environment.

FinalLoud v3.0.16 WiN

Team R2R | 2022.04.06 | 11.59 MB

PLATFORM: AU/VST/VST3/AAX/x86/x64

FinalLoud 2 is a loudness and True Peak finalizer tool. It is the successor of FinalLoud. FinalLoud 2 solves quickly a very common challenge in audio engineering: reaching a certain target loudness level for any audio material while maintaining given True Peak ceiling. Therefore FinalLoud 2 combines a gain control, a high quality True Peak limiter and an accurate loudness meter under an easy-to-use interface. The gain control pushes the loudness level to the target level and in parallel the limiter ensures the True Peak ceiling.

Amplifikation Clarent v1.0.0 WiN

Team R2R | 13 Jan 2021 | 443MB

PLATFORM: WiN32/64 – STANDALONE/VST/VST3/AAX(MODiFiED)

3rd gen Tube Simulation technology following the much hyped Amplifikation Caliburn and Matchlock. Amplifikation Clarent is inspired by Orange* amps and thanks to the 3rd gen Tube Simulation engine guarantees a more dynamic natural sounding, realistic amp recording experience for guitarists. There are no other guitar amplifiers other than Orange Amplifiers* whose looks and presence is as unique as its sounds. Instantly recognizable by its bright colorful appearance, delivering thunderous crunchy tone used by world class acts such as Fleetwood Mac*, The Black Crowes*, Oasis*, Mastodon*, High on Fire*, Slipknot*, Orianthi*, Deftones*, Korn*, and many others!