Micro Synth Pack v1.0.3 WiN MAC

TEAM R2R | 15.9.2016 | WiN: 3.72 MB | OSX: 2.2 MB

…::: AU, VST, VSTi, VST3, x86, x64 :::…

Classic DX10 based FM Synth and JX10 Analog Synth with a huge variety of sounds from classic pianos and keyboards to space age pads. In keeping with a long term Tracktion tradition the MDA synths are back! Since T1 Tracktion came bundled with the incredibly good value MDA synth pack. We’ve now taken the great engine behind those synths, improved them, and given them a new interface for easier control and visualisation. The FM Synth is based on the MDA DX10 and can produce a diverse array of sounds. From classic plucked and percussive instruments such as pianos, guitars and bells to extreme modulated intergalactic growling bass. It would be very easy to create an entire song using this synth alone!

APU Loudness Compressor v5.5.9 WiN

Team BLiZZARD | 17 June 2026 | 27.81 MB

x64: STANDALONE, VST3, AAX | x86: STANDALONE, VST3

The APU Loudness Compressor plug-in is a compressor/expander designed to support modern loudness types (LUFS, True Peak). Typical compressors operate using only RMS and/or Peak units of measurement. But technology has come a long way since then and we’re overdue for an upgrade.. This compressor uses modern industry standard LUFS units of measurement to provide a far more transparent response which is connected to the way humans actually experience loudness. The entire signal flow of the compressor operates within this more precise understanding of loudness. The plug-in user interface provides a more flexible alternative to traditional threshold-and-ratio style of compressor controls. Instead, source and target ranges of loudness can be configured and the compressor will either compress or expand as needed.

Loudness Contour v5.5.9 WiN

Team BLiZZARD | 17 June 2026 | 55MB

Real-time equal-loudness Contour Shaping

APU Loudness Contour is a real-time equal-loudness filter that offers precise control over a wide range of perceptual loudness contours, including ISO 226 (2003 & 2023), Fletcher-Munson, K-weighting, A/C-weighting, ECMA-418, and ITU-R 468. Each contour is normalized to 0 dB at 1 kHz and includes a dedicated contour weight parameter, allowing you to scale the frequency response in both positive and negative directions. A weight of 0% results in a flat response, while negative weights invert the contour. ISO 226 and Fletcher-Munson curves support variable reference levels from 20 dB SPL to 120 dB SPL, with smooth interpolation between phon curves.

Loudness Leveler v5.5.9 WiN

Team BLiZZARD | 17 June 2026 | 28 MB

APU Loudness Leveler is a real-time volume leveler/rider designed to keep audio within your target loudness range in real-time. Set a target loudness, choose a tolerance, and the leveler continuously applies gain correction to keep dialog, vocals, podcasts, streams, or program material hovering around the level you want. The Leveler is designed to be “set it and forget it” for real-time loudness control. Configurable timing modes cover fast momentary riding, slower short-term correction, and a traditional RMS mode. Guard modes, sidechain control, predictive low-latency operation, detector EQ, and built-in limiting provide plenty of tools to keep the leveler working smoothly in a wide range of real-world scenarios. The built-in guard mode is especially useful for keeping the leveler from boosting into tails or cutting into transients, while the low-level handling modes can keep it from overreacting to noise and ambience when the source gets quiet.

Loudness Limiter v5.5.9 WiN

BLiZZARD | 17 June 2026 | 38 MB

x64:(STANDALONE, VST3, AAX) | x86:(STANDALONE, VST3)

The APU Loudness Limiter is a real-time limiter designed to support multiple loudness types simultaneously. The limiter can be configured to use LUFS, True Peak, RMS, and/or Peak loudness types. This allows you to target multiple requirements simultaneously, such as a specific LUFS target and a specific True Peak target. Internally, the ballistics of the limiter are adjusted to accommodate the different loudness type limiter settings.

APU TrueGain v5.5.9 WiN

Team BLiZZARD | 17 June 2026 | 218.45MB

..: STANDALONE | VST2 | VST3 | AAX :..

APU TrueGain Perceptual Gain Control.

APU TrueGain is a powerful utility plugin which corrects for a fundamental challenge in audio engineering: a mix’s tonal balance changes depending on the listening level. By modeling the human ear’s frequency sensitivity at different Sound Pressure Levels (SPL), TrueGain allows you to audition and control your audio with perceptual consistency. The core of TrueGain is its ability to perform “translation checks.” After a simple one-time calibration to your monitoring setup, you can use TrueGain to simulate how your mix will sound at different loudness levels, all without changing the actual volume of your monitors or headphones. This allows you to quickly check how the bass will hold up or if the vocals will become harsh in quieter listening environments, ensuring your mix translates reliably.

Verberate Immersive v2.3.2 WiN MAC

Team R2R | 12 July 2025 | WiN: 14.22MB | MAC: 32.76MB

PLATFORM: AU/VST/VST3/AAX/x86/x64

Verberate Immersive 2 is a surround reverb and a 3D capable edition of Verberate 2 — our algorithmic reverb plug-in that simulates real acoustical spaces with exceptional realism. Verberate Immersive 2 replaces Verberate Surround and supports all common surround and immersive formats up to 7.1.6 channels. The new Vivid Hall algorithm adds time variance to avoid the stiffness that plagues convolution based reverbs while preserving the natural high density reverb tails of Verberate Surround 1.