Elements Suite v2.00 MAC

TEAM HEXWARS | 13.07.2018 | 576 MB

AU/VST/VST3/AAX + RX STANDALONE

The Elements Suite: Everything you need to repair, mix, and master The Elements Suite combines four powerful, award-winning audio plug-ins in one affordable package: Nectar Elements, RX Elements, Neutron Elements, and Ozone Elements. Born from years of audio research and development, Nectar Elements, RX Elements, Ozone Elements, and Neutron Elements are now available in one convenient bundle that not only elevates your audio production, but inspires and enables your creativity. It’s everything you need, whether you’re recording and editing a podcast, cleaning up guitar tracks or vocals, mixing your first record—or your hundredth.

MSW2 v1.0.1 WiN MAC

P2P | 13.07.2018 | 6.61 MB

AAX AU VST VST3

The new MSW2 is a complete overhaul in terms of code, interface & creativity, it can be used both subtly for better mixes, or pushed to the extreme to achieve a host of creative possibilities in the stereo field.

VCL-4 v1.3.0 WiN

TEAM V.R | 12 July 2018 | 3.56 MB

(Win32/64; AAX*, VST3, VST)

VCL-4 is a faithful emulation of the silver face revision of the op-amp-based successor of THE classic late 60s opto leveler. It provides you with unintrusive to extreme program dependent and musical opto compression. The switchable ratio option makes for a flexible solution over a wide range of source material. During the modeling process Fuse Audio Labs rebuilt the entire original circuit on strip board, however replacing the original opto-cells that were made up of an LED and an photoresistor with suitable Vactrols. Every part of the circuit including the receiver stage, the side-chain and Vactrol LED driver circuit, the Vactrol itself as well as the push-pull driver stage and the output transformer has been accurately modeled.

VCL-373 v1.3.0 WiN

TEAM V.R | 12 July 2018 | 3.37 MB

Vintage Comp/Limiter

(Win32/64; AAX*, VST3, VST)

The VCL-373 is a recreation of an early 60s broadcasting limiter/compressor that eventually found its way into many mastering studios. 1963 marks a technological shift in that the famous diode-bridge based gain reduction stage was replaced by a transistor-based circuit that allowed for less THD and more reliable control voltage tracking. The plugin includes a faithful emulation of the audio transformers, the crucial feedback compression circuitry as well as the discrete class A make-up amplifier. Some convenient features including a continuous drive control, gain compensation, GR metering and a dry/wet mix have been added in the digital domain.

Bitspeek v1.x.x WiN MAC

TEAM R2R | 2015.05.25 | v1.5.0:WiN+ v1.0.2: MAC: 15 MB

Bitspeek is a real-time pitch-excited linear prediction codec effect. Right now you are probably thinking, “oh, another one of those”? Or perhaps not. Chances are that you have never heard about “linear prediction”, although most of us use it daily when we talk on our cell phones. Linear prediction coding is a voice compression technology that appeared in commercial products in the seventies and was implemented in some well-known speaking toys of the early eighties. We have applied this technology to create a VST / AU effect plug-in that analyzes audio, extracts a number of parameters (including pitch, volume and formant data) and then resynthesizes the audio using a simple oscillator, noise and filter architecture. We have added a number of playback parameters that adjusts the pitch and tonal quality of the sound as well as support for MIDI and a beat-synchronized “formant freezing effect”. Despite having only a few simple controls, this box can produce a broad range of sounds from cheap speaking toys to high-end vocoder and talkbox effects.

SEM-Filter v1.1.0.389 WiN

Team V.R | 07 Jul 2018 | 104.3MB

(Win32/64; AAX, VST3, VST)

Combining simplicity with pure tone-shaping power, SEM-Filter is a futuristic twist on a classic synth filter. Renowned for its pioneering technology in the 70s, we paid tribute not only to its sound but also the SEM’s reputation as a trailblazer. Using the meticulous modelling techniques, and by adding exciting new features, we have created a true modern classic audio filter. No longer confined to a synthesizer, you can now use the era-defining filter tone of Tom Oberheim’s cult synth module on any audio source you wish. Process acoustic instruments in your DAW, shape vocals, perform sweeps on your whole mix, create builds, rises, and drops, even use it to improve a soft-synths stock filter.

Mini-Filter v1.2.0.389 WiN

Team V.R | 07 Jul 2018 | 87.8MB

(Win32/64; AAX, VST3, VST)

Ever wanted to use one of the world’s most famous synth filters in your DAW?

The classic filter from our lovingly recreated Mini V software instrument is now in a dedicated plugin. Now you can add the familiar filter tone to warm or smooth out your audio, or to add sweetness to a sensitive recording. Not only that, but Mini-Filter also includes a powerful modulation section which consists of an envelope follower, an LFO, and a step sequencer. A patch manager is also built-in, along with a set of presets to inspire your creativity. An essential, expressive, and creative tool for any producer or performer.