Blofeld v1.1.1 WiN

BUBBiX | 29 June 2025 | 45 MB

The versatile Waldorf synthesizer classic Blofeld now also available as a plugin for your DAW. With the Blofeld plugin you can also control your hardware and it is compatible with existing Blofeld soundsets. The sound generation of the Blofeld plugin delivers the typical fat and rich Waldorf sound character that so many Waldorf users worldwide love when they are playing their Blofeld, Q, Q+, Microwave, Microwave II/XT or even the flagship, the Wave. The secret of its sound is a powerful wavetable engine that enables these intense and expressive sounds. This unique synthesis system is based on the revolutionary PPG synthesizers of the early 80s. When you hear the Blofeld for the first time, you’ll immediately remember those edgy, assertive or bell-like timbres that have been an integral part of countless worldwide hits since the PPG era.

Tetrad v1.0.2 WiN

Team R2R | 21 August 2025 | 7.1MB

Tetrad is a hybrid instrument based on physical modelling and granular synthesis. A unique quad bus signal chain feeds 4 modelled plates alongside a full modulation matrix, creating a soundscape that rewards experimentation. Tetrad is like no other synth you’ve ever used. The plugin takes four oscillators, routes them in combination through a Quad AM processor that works like a pseudo-sequencer, a specifically tailored Granulator, and four physically modelled plate resonators. Inspired by Gadi’s sculpture-based synth installation, as heard on the album Modes of Vibration, Tetrad was originally devised as a complement to the slashed plates and sound generators of the experimental setup, but has grown into a plugin instrument that puts the capabilities of the installation into a single piece of software in a DAW.

Modus v1.4.4 MAC

Team HCiSO | 19 August 2025 | 28.17 MB

Enter a sonic imaginarium where hard physics meets soft synth processing. Modus is a virtual world of conceptual instruments, modelled with cutting edge physical behaviours and acoustic properties.

Preparation v1.1.8 MAC

Team HCiSO | 19 August 2025 | 7.92 MB

Preparation is a physical modelling instrument based on nonlinear models of strings and collisions. Physical modelling of prepared strings Preparation is based on mathematical modelling of 2 basic elements; strings which can be configured as bars, and a rattling element. Each voice has a pair of strings connected by a rattle that reacts to the vibrations at each end. This uses the latest research in collision modelling to calculate the acoustic system in real-time. The strings have parameters for nonlinearity, inharmonicity, sustain and tone. The rattle has controls for the mass at each end, the gap from the strings, the stiffness, edginess, strength and its position. A low shelf EQ, overdrive and reverb units complete the signal chain, giving a wide range of sounds from cutting leads to epic soundscapes. See this tutorial post for further details.

Preparation 2 v2.1.3 MAC

Team HCiSO | 19 August 2025 | 6.8MB

Preparation 2 creates a virtual world of augmented strings using our latest physical modelling techniques. Two strings collide with a rattle and a dynamic fret to deliver a rich palette of acoustic timbres, from unique instruments to experimental soundscapes.

Tetrad v1.0.2 MAC

Team HCiSO | 19 August 2025 | 6.8MB

Tetrad is a hybrid instrument based on physical modelling and granular synthesis. A unique quad bus signal chain feeds 4 modelled plates alongside a full modulation matrix, creating a soundscape that rewards experimentation. Tetrad is like no other synth you’ve ever used. The plugin takes four oscillators, routes them in combination through a Quad AM processor that works like a pseudo-sequencer, a specifically tailored Granulator, and four physically modelled plate resonators. Inspired by Gadi’s sculpture-based synth installation, as heard on the album Modes of Vibration, Tetrad was originally devised as a complement to the slashed plates and sound generators of the experimental setup, but has grown into a plugin instrument that puts the capabilities of the installation into a single piece of software in a DAW.

DrumComputer v1.3.6 MAC

Team V.R | 18 August 2025 | 261.25 MB

64Bit: AU, STANDALONE, VST3i, VST2i, AAX

DrumComputer is the new specialist for synthetic drums, combining classic and modern synthesis with flexible modulations and luxurious sequencing. Intelligent randomizers, elegant pattern editing and import of your own samples are just a few of the mind blowing possibilities. Enjoy new drums everyday and get inspired by all the creativity that DrumComputer sets free. Just because, there still is all the unheard of.