Outer Space v1.2.0 WiN

Team V.R | 18 May 2018 | 15.28 MB

VST VST3 AAX x86 x64

Outer Space is a faithful emulation plugin of a famous vintage tape echo made in the early seventies. As the original unit, Outer Space features a tape echo section with three playback heads and a spring reverb tank. We have modelled three different tape frequency responses and saturations, along with all the analog imperfections of tape recording/playback. We’ve also modelled the ballistic response of the delay rate (repeat rate) which can create eerie pitch shifts (due to the Doppler effect), one of the classic tape echo-based sound effects

miniBit v1.5.0 WiN

Team V.R | 18 May 2018 | 6.71 MB

AAX VST VST3 x86 x64

miniBit is a 8-bit/chiptune style synthesizer that emulates the sound of 80s game consoles and retrocomputers. It features a main oscillator with 12 waveforms paired with a sub oscillator (a square wave pitched one octave below). The waveforms are not bandlimited and will produce aliasing. Furthermore, using the built-in bitcrusher, you can create even more noisy and retro sounds.

Destructor v1.3.2 WiN

TEAM V.R | 16 May 2018 | 48.51 MB

(Win32/64; AAX, RTAS, VST3, VST)

Destructor is a powerful distortion and amp sim modeling tool capable of simulating any kind of distortion: from harsh digital destruction to smooth compression or guitar amp simulation (works for clean tones too.), and most importantly, yours. It is delivered with hundreds of presets and predefined models, either inspired by existing gear (guitar & bass amps or cabinets, compressors, pedals, tape machines…) or created by our destructive minds. But the plug-in is not limited to these predefined models: all parameters of existing presets are fully editable, which gives you access to an unlimited number of distortion simulations – no need to purchase extra presets or amp models to build your custom tone. Based on a perceptual model rather than on electronic designs or impulse responses, the signal chain is reduced to its bare minimum, simplifying the process of tweaking the tone and making it fit into the mix.

gEQ12 v1.4.1 WiN

Team VR | 09 May 2018 | 3.1 MB

gEQ12 is 12 band stereo/MS graphic equalizer with accurate spectrum analyzer and minimum/linear phase modes. Today’s mixing and mastering processes require a full featured but easy to use equalizer which can accurately shape the tone of a track , bus or master track. eEQ12 provides all necessary tools in one package paired with some unique features. The display shows the spectrum curve of incoming and outgoing signal. gEQ12 has the unique feature that the outgoing spectrum is directly calculated from incoming spectrum (incoming spectrum – filter curve = outgoing spectrum). This allows you to capture the incoming signal, to freeze it and to modify then the filter curve based on the altered outgoing spectrum. The filter response is controlled by 12 individual filter bands. Each filter band has its own display handle, which can be adjusted by mouse.

LA xLimit II v1.3.0 WiN

TEAM V.R | 02 May 2018 | 4.66 MB

AAX RTAS VST VST3 CE x86 x64

LA xLimit II is an advanced look ahead, wideband linked-stereo limiter including ISP (inter sample peak) detection and oversampling. LA xLimit II is the successor of LA xLimit, our very popular look ahead limiter. It offers more control over transients and adaptive release curves. It also adds a second limiter stage for better performance in ISP detection mode. The goal of the design was to cover a broad range of limiting applications in today’s mixing and mastering situations with strong focus on low aliasing.

Impress v1.9.10 WiN

TEAM V.R | 02 May 2018 | 3.73 MB

AAX VST VST3 RTAS x86 x64

Impress is a wideband stereo compressor including side-chaining, various prefilter options and state-of-the-art over sampling. The goal of the design was to cover a broad range of compression applications in today’s mixing and mastering situations with strong focus on low aliasing. So, Impress could be used to shape subtle a snare sound, glue different tracks on instrument bus and even do complex tasks like deessing or voice over’s.

Mango v1.0.0 WiN

Team V.R | April 28 2018 | 2.8 MB

(Win32/64; AAX, VST3, VST)

Mango is a newly developed Harmonic Processor creating luscious sounds in an extraordinary musical manner. This fruity valve or tape like decadent dessert will take your music to another level; adding that sweet, creamy and pure fruitiness making your audio material a succulent masterpiece. The additional Mid/Side processing option allows a decent and smooth fine tuning of the stereo base you won’t get from any other software or hardware. We refrained from names like “tape simulation” or “valve” for the processing unit. Though Mango’s refinements are loosely related to such analog models – Mango’s variety is far beyond. Fine-tune to add the perfect amount of ear candy to your sound. No guilt, no regrets.