MH CGII v4 WiN

Team R2R | 20 March 2026 | 22MB

CGII: Make it Good & Loud!

CGII is comprised of two uniquely complementary dynamics enhancement sections, a new True Peak Limiting stage, DC blocking and dither with LUFS/true peak metering via spiffy tube filament displays, all operating at up to 16x over-sampling (or none at all – depending on your tastes). The design prioritizes musical integrity and ease of use, with the ability to add effective loudness, weight and definition without diminishing spatial depth and visceral impact the way traditional dynamics processors often do. Use CGII to make your masters loud without losing the clarity, density and heft of the original mix. Even if you are working with a mix that is already loud, you can give it a little extra, without adding unpleasant distortion and without flattening out the material and sucking the life out of the low end. At the same time you can control the true-peak level of the program to ensure that there are no inter-sample overs.

APU Dynamics Optimizer WiN MAC

Team BTCR | 17 March 2026 | 40.35 MB

….: STANDALONE: x86, x64 :….

The APU Dynamics Optimizer is a dynamics optimization tool designed to support modern loudness types (LUFS, True Peak). Underneath the hood, the optimizer uses the same compression engine as the APU Loudness Compressor, but benefits from the full audio waveform instead of real-time measurements. This allows the gain envelope to be meticulously optimized across the entire waveform. The design of this tool allows you to very precisely target a specific average LUFS and dynamic range. Once the gain envelope has been optimized, you can playback the result in real-time while adjusting the character of the sound with the same collection of parameters from the compressor plug-in.

APU Loudness Compressor v5.3.1 WiN MAC

Team BTCR | 17 March 2026  | 88.57 MB

The APU Loudness Compressor plug-in is a compressor/expander designed to support modern loudness types (LUFS, True Peak). Typical compressors operate using only RMS and/or Peak units of measurement. But technology has come a long way since then and we’re overdue for an upgrade.. This compressor uses modern industry standard LUFS units of measurement to provide a far more transparent response which is connected to the way humans actually experience loudness. The entire signal flow of the compressor operates within this more precise understanding of loudness. The plug-in user interface provides a more flexible alternative to traditional threshold-and-ratio style of compressor controls. Instead, source and target ranges of loudness can be configured and the compressor will either compress or expand as needed.

Loudness Limiter v5.3.1 WiN MAC

Team BTCR | 17 mARCH 2026 | 87.61MB

PLATFORM: AU/VST2/VST3/AAX

The APU Loudness Limiter is a real-time limiter designed to support multiple loudness types simultaneously. The limiter can be configured to use LUFS, True Peak, RMS, and/or Peak loudness types. This allows you to target multiple requirements simultaneously, such as a specific LUFS target and a specific True Peak target. Internally, the ballistics of the limiter are adjusted to accommodate the different loudness type limiter settings.

Multiband X6 v1.0.44 WiN

Team R2R | 15 March 2026 | 23.5 MB

Outstanding mixes — whatever your style

X6 is an advanced multiband compressor that sets new standards in mixing and mastering. Whether it’s radio-ready vocals, a pumping drum bus or punchy mastering, X6 gives you the power.

bx_limiter True Peak macOS

Team HCiSO | 27 June 2025 | 37.83 MB

The bx_limiter True Peak from Brainworx is a completely new design, crafted to avoid all the shortcomings of other true peak limiters. Use it to confidently hit your loudness targets without leaving behind any distortion-inducing intersample peaks, and without compromising on the sound quality of your limiter. The best sounding True Peak Limiter available!

Maximal 3 v3.0.5 WiN

Team R2R | 23 October 2024 | 10.9 MB

PLATFORM: VST2/VST3/AAX(MOD)

Maximal 3 is a true-peak brickwall limiter, soft clipper, and broadcast standard loudness meter. Maximal 3 is a loudness maximiser, designed to limit and maximise your track. Featuring both a true-peak brickwall limiter and a variable shape soft clipper, Maximal 3 can increase the overall loudness of your track, without destroying the sonic quality. The limiter features true-peak lookahead detection, meaning inter-sample peaks will never overshoot and clip. With four different modes, and controls for attack and release, the shape of the limiter can achieve anything from transparent limiting with transient preservation, to warm bus gluing or pumping.