PTM-5A v3.0.2 WiN MAC LiNUX

Team R2R | 04.10.2020| WiN: 3.09 MB | OSX: 6.25 MB | LiNUX: 3.20 MB

Vintage Pultec Mid Range EQ Plug-in

Emulating the classic vintage Pultec MEQ-5 mid-range EQ, the PTM-5A replicates the sought-after passive filter character of the original, providing a versatile equalizer capable of subtle sonic enhancement or adding more obvious bite to the mid-range to help elements of the mix stand out. Ideal for acoustic instruments, drums and vocals, the PTM-5A perfectly complements the more familiar PTC-2A vintage Pultec EQ, much the same as the hardware MEQ-5 and EQP-1A units.

PTC-2A v3.0.2 WiN MAC LiNUX

Team R2R | 04.10.2020 | WiN: 3.3 MB | OSX: 7.03 MB | LiNUX: 3.53 MB

AU/VST/VST3/AAX/x86/x64

Vintage EQ Emulation

The PTC-2A is an emulation inspired by one of the most sought-after vintage EQs. Separate boost and attenuate controls allow simultaneous low frequency boost and cut, sculpting the signature sound, while a transformer-coupled valve / tube amplifier emulation further enhances the vintage qualities. V3.0.0 includes feature additions such as circular, relative and linear control modes, together with more flexible and consistent user interface resizing across different formats and extensive internal framework improvements…

FC70 v3.0.0 WiN MAC LiNUX

TEAM R2R | 17.10.2018 | WiN: 3.10 MB | MAC: 8.26 MB | LiNUX: 10.6 MB

AU/VST/VST3/AAX/x86/x64

The effortless control and uniquely musical character of one of the best-known vintage compressor / limiters. Inspired by the legendary smooth, effortless dynamic control and uniquely musical character of the classic Fairchild 670 limiter, the FC70 tames dynamics without robbing the mix of power and detail. The FC70 uses state of the art processing to emulate a fully balanced transformer-coupled signal path, combined with an innovative delay-free feedback algorithm which accurately mirrors equivalent analogue behaviour. In addition, the sidechain includes fast attack and program dependent release settings, combined with Lateral / Vertical, Independent and Linked stereo channel modes.

ST1 v1.0.4 WiN MAC

Team R2R | 04.10.2019 | WiN: 3 MB | MAC: 2.32 MB

PLATFORM : WiN/MAC 32/64 – AU/VST/VST3/RTAS/AAX(PATCHED)

ST1 is a simple tool that lets you control the width and the panorama of a stereo audio signal. It includes a mono-to-stereo function, a stereo field enhancer, a rich panning knob that includes spectral panning, and a bass-focus feature. The phase and correlation meter visually monitors the panning position and stereo width.

EQ500 Series v3.0.0 WiN MAC LiNUX

TEAM R2R | 04.10.2020 | WiN: 3.10 MB | MAC: 4.89 MB | LiNUX: 2.65 MB

AU/VST/VST3/AAX/x86/x64

A natural sounding, versatile, analogue filter modelled EQ, economical with CPU and system resources. Digital EQ no longer has to sound digital. The EQ500 plug-in emulates all the desirable qualities of a professional analogue channel equalizer, while the elegantly simple design makes adding texture and colour – or taming problem frequencies – both intuitive and instinctive. Styled as a virtual 500-series module, the EQ500 uses innovative analogue filter modelling to open up the response and accurately replicate the more natural sound of analogue designs, without additional latency or high CPU demand. More efficient use of CPU and system resources allows more plug-in instances in a typical audio workstation project.

DYN500 v3.0.0 WiN MAC LiNUX

R2R | 2020.10.04 | WiN: 2.99 MB | MAC: 4.68 MB | LiNUX: 3.62 MB

AU/VST/VST3/AAX/x86/x64

A flexible, console grade channel compressor with analogue warmth and character. The DYN500 plug-in emulates all the desirable qualities of a professional analogue channel compressor, taming dynamics without restricting the natural character of a mix or performance. Styled as a virtual 500-series module, the DYN500 provides soft-knee compression coupled with a gentle tape-saturation overdrive for warmth and character at high signal levels. Just like the best analogue gear, the harder you hit it, the better it sounds. Designed as a ‘one in every channel’ compressor / dynamics plug-in, the DYN500 can be used in mono or stereo channels, delivering professional console grade processing, with efficient use of CPU and system resources. More efficient use of CPU resources allows more plug-in instances in a typical audio workstation project.

RX 8 v8.1.0 macOS

MORiA | 30 September 2020 | 1.3 GB

AAX(By XDiE), STANDALONE, AU, VST, VST3

Audio Editor Advanced

RX has long been the go-to audio repair and polishing suite for film, television, music, podcasts, video games, sample libraries, and more. With RX 8, we’ve created new tools and improved beloved modules to help you accomplish more in less time than ever. Rescue your rig with Guitar De-noise: powerful tools to control fret squeaks, amp hiss and noisy pick sounds.