WOK UNCLE SAM v1.1 VSTi WiN

P2P | 03/07/2014 | 8.4 MB

64 presets included.

Our next step in emulating classic analogue synthesizer sound! UNCLE SAM is the big brother of our SAM plugin, again featuring our VAE* technique to emulate analog circuit instabilities. This is the plugin version of how the musicians wished the Oberheim™ SEM module to be in that past times! We kept the warm sound and the clearly laid out user interface of the predecessor SAM and added all this nice functions, which where to expensive to realize in hardware in that time. UNCLE SAM now has full equipped envelopes , a third oscillator, a ring modulator and an effect unit with delay and chorus. There is a third envelope to control the volume of the ring modulator / noise source and/or the pitch of VCO2 . The third VCO can run as a sub osc or tuned between the fine tune settings of the two main VCOs. There is an adjustable amplifier stage for all OSCs together with the ability to saturate the filter.

Volume Balancer v1.10 WinALL Regged

TEAM BLiZZARD | 2014-07-02 | 832.03 KB

Volume Balancer is a shareware utility which adjusts the peak and average levels of WAV files so that they have the same perceived loudness. It is a 32 bit program that runs on all versions of Windows from Windows 98 onwards. It is primarily intended for use as a final step before burning a compilation CD from a variety of sources. Note that Volume Balancer works only on CD-format WAV files (ie. 44.1kHz, 16-bit, stereo). It does not work on MP3 files; if you wish to balance the loudness of these, it is necessary to convert them to WAV files first.

ISRC Editor v1.0.0.1 WiN MAC OSX

WIN/OSX | WIN: 1.29 MB | OSX : 4.50 MB

The ISRC Editor is free software that enables you to inspect, add or edit ISRC information in a Broadcast wav file. The ISRC is embedded in the wav file following the EBU tech3352 specification as presented by the Music Producers Guild. After opening a wav file with the ISRC Editor the ISRC code, if available, will be shown. The ISRC code can then be changed AND If there is no ISRC code available it can be added. The input is validated to make sure the code is properly formatted. Finally, the ISRC code can be saved back to the wav file or to a new wav file. The ISRC Editor is a single file editor. If you want batch conversion or other features then try the DDP Creator.

FairStars Audio Converter Pro v1.70 WiN

Team LAXiTY | July 02 2014 | 6.05 MB

Media File Conversion Tool

FairStars Audio Converter is a media file conversion tool to convert WAV, RealMedia(RM, RA, RAM, RMJ, RMVB), AIF, AIFF, AIFC, AU, Creative VOC, PVF, PAF, SVX, IFF, APE, FLAC, OGG, VQF, MP1, MP2, MP3, MP4, M4A, M4B, AAC, AMR, AWB, WMA, WMV, ASF To WMA, MP3, AAC, M4A, AMR, AWB, VQF, OGG, FLAC, APE, WAV formats. You can convert multiple files in a single batch, regardless of their source and target formats. In addition, the program includes a built-in player. The audio format conversions are performed without any temporary files, allowing high conversion speeds. Other features include normalization (adjust volume), support for ID3 tags and more.

Digital Audio Converter v2.6 WiN

Team R2R | June 30 2014 | 4.39 MB

All-in-One Audio Converter

Digital Audio Converter is a powerful all-in-one audio converter for audio conversion and audio CD ripping. Using Digital Audio Converter, you can convert between different audio formats including MP3, WMA, WAV, AAC, FLAC, OGG Vorbis, APE, MPC, SPX, TTA, WV, rip music CD to different audio formats and get information (e.g. Artist, Album, Genre, Track name) from FreeDB, a music compact disc database on the Internet. In addition, the music file tag content (meta data) is also converted.

DNX 03 MULTiBAND Compressor v1.0.2 VST WiN

HY2ROG3N | 29 June 2014 | 15.5 MB

DNX-03 is a three-band stereo Compressor (win vst plugin) inspired by the analog models, with some added features such as noise reduction and wide stereo control for each individual freq-band. The DNX-03 is able to split the incoming signal into three frequency-bands using a 6dB per octave crossover. First-order filters are considered by many audiophiles to be ideal for crossovers. Each band is passed through a compressor and then through a stereo processor where compression,gain and stereo image can be altered and improved. The outputs of the compressors and processors are then re-combined and fed to the master output.

Cycling74 Pluggo v3.54 VST RTAS WiN

TEAM AiR | 09/2006 | 33.1 MB

Pluggo 3.5 is an extraordinary collection of more than one hundred audio plug-ins. Pluggo works with sequencers and audio applications that support Audio Unit, VST, and RTAS plug-in formats. There has never been anything close to the selection of plug-ins assembled in Pluggo. With its range of sound design possibilities, Pluggo 3.5 is more than just a few effects-it’s a real-time interactive audio processing, modulation, and synthesis environment that works right inside your favorite audio application. Effects categories include delays, filters, pitch effects, distortion, granulation, spectral effects, modulators, multi-channel effects, synthesizers, audio routing, reverb and dynamics, and visual display. It’s easy to see why Pluggo has been winning rave reviews from critics and users since its release.