🎵 MaGeSY® R-EVOLUTiON™⭐⭐⭐

  • Enhanced EQ v1.4.7 U2B macOS-MORiA
    September 12th, 2024 ⚡
    Categories:

    Enhanced EQ v1.4.7 U2B macOS-MORiA-MaGeSY

    Enhanced EQ v1.4.7 U2B macOS

    MORiA | 21 August 2024 | 78.1MB

    ….: AU, VST, VST3 :….

    ENHANCED EQ is a unique, easy-to-use effect that will provide your tracks with the analog sound of the masters – equally potent at adding subtle definition as rich loudness. Modeled from a boutique studio standard, this is the go-to EQ for warmth, body and definition at the bottom end of your mix, or for crisping up the midrange. Exclusively emulated by the masters at Softube.


    Viewed 38119 By Music Producers & DJ´s.


  • OmniAmp v1.0.2 WiN-R2R
    September 12th, 2024 ⚡
    Categories:

    OmniAmp v1.0.2 WiN-R2R

    OmniAmp v1.0.2 WiN

    Team R2R | 12 September 2024 | 3.7 MB

    OmniAmp is an All-in-One Amplifier from Arboreal Audio–it can be used as a channel strip, a guitar amp, or a bass amp, and it features a range of extra controls for efficient and colorful mixing.


    Viewed 33981 By Music Producers & DJ´s.


  • AmpliTube 5 MAX v5.8.2 WiN-R2R-MaGeSY

    AmpliTube 5 MAX v5.8.2 WiN

    Team R2R | 12 September 2024 | 2.63 GB

    AmpliTube software has forged a formidable reputation over the years for offering a comprehensive array of digital tone-tweaking tools, but AmpliTube 5 promises to eclipse its predecessors with with a newly designed GUI that is fully scalable and supports Retina displays, an enhanced user experience, and more gear. A lot more gear. All in, there are 129 new models, making for a total of over 400 gear models in the AmpliTube 5 MAX version, plus cabinet section that has been retooled using IK Multimedia’s new Volumetric Impulse Response (VIR) technology, improving power amp/speaker cab interactions for more authentic tone and feel. The VIR tech was developed by measuring 600 IRs per speaker of every existing and new cabinet model, making for 143,000 IRs in total, allowing for a three-dimensional grid interface for mic placement. You can also now import and load your own IRs. Also new to AmpliTube 5, we’ve got an expanded, fully configurable signal chain that allows you to deploy a wet-dry-wet configuration and experiment with more complicated setups – series and parallel routing? Fill your boots.


    Viewed 104172 By Music Producers & DJ´s.


  • Destructor v1.62 WiN MAC-R2R
    September 12th, 2024 ⚡
    Categories:

    Destructor v1.62 WiN MAC-R2R

    Destructor v1.62 WiN MAC

    Team R2R | 12 September 2024 | WiN: 32.8MB | OSX: 129.3MB

    ..: AU, AAX, RTAS, VST3, VST, x86, x64 :..

    Destructor is a powerful distortion and amp sim modeling tool capable of simulating any kind of distortion: from harsh digital destruction to smooth compression or guitar amp simulation (works for clean tones too.), and most importantly, yours. It is delivered with hundreds of presets and predefined models, either inspired by existing gear (guitar & bass amps or cabinets, compressors, pedals, tape machines…) or created by our destructive minds. But the plug-in is not limited to these predefined models: all parameters of existing presets are fully editable, which gives you access to an unlimited number of distortion simulations – no need to purchase extra presets or amp models to build your custom tone. Based on a perceptual model rather than on electronic designs or impulse responses, the signal chain is reduced to its bare minimum, simplifying the process of tweaking the tone and making it fit into the mix.


    Viewed 33452 By Music Producers & DJ´s.


  • MB-7 Mixer 3 v3.60 WiN MAC-R2R
    September 12th, 2024 ⚡
    Categories:

    MB-7 Mixer 3 v3.60 WiN MAC-R2R

    MB-7 Mixer 3 v3.60 WiN MAC

    Team R2R | 12 September 2024 | WiN: 66.7MB | MAC: 618.9MB

    WiN32/64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

    MB-7 Mixer is a unique plug-in that splits the signal into several frequency bands and lets you mix and process them as if they were separate tracks. Each band proposes controls that can be found on a mixing console, and more: bypass, mute or solo each band separately to isolate frequencies you want to work on, adjust the gain, the “stereoness” and the position in the stereo field. When manipulating the stereo image, a master mono switch also lets you check mono compatibility. The plug-in can also operate as a multiband VST and Audio Unit host: you can process each band independently with your favorite VST or Audio Unit plug-ins! Up to four plug-ins can be loaded on each band, pre or post fader. Latency compensation, presets management, undo/redo integration, and individual plug-in bypass are included for optimal operation. The plug-in also proposes unique linking and grouping options thanks to our multi-instances technology. You can link bands together within a single instance or between several instances of the plug-in on different tracks. This lets a simple fader control as many bands on as many tracks as you want. This is particularly useful when adjusting the placement or the balance of several


    Viewed 65974 By Music Producers & DJ´s.


MaGeSY TeleGram Subscribe & Stay up to date with all the Posts that are published in MaGeSY MaGeSY Podcast: Subscribe & Stay up to date with all the Audio Posts that are published in MaGeSY MaGeSY Instagram Official MaGeSY-Youtube Official MaGeSY-X Official MaGeSY-Facebook Official MaGeSY-Pinterest Official MaGeSY-WhatsApp Channel Official

With Adblocker the page loads slower & avoid enhanced new search




ಮ್ಯಾಜೆಸ್ಯ್