MagicDeathEyeStereo v1.0.0 WiN

Team R2R | 09 May 2020 | 7.2 MB

PLATFORM : WiN32/64 – VST/VST3/AAX(MODiFiED)

The second product of the ongoing and very fruitful collaboration with MagicDeathEye is a faithful emulation of their stereo master buss compressor & equalizer. From the description of the hardware: “The stereo compressor is two mono compressor circuits with some extras designed for mastering and buss compression duties. This new version has an added EQ section. There are two (boost only) bands with two frequency selections each. The EQ is worked into the Variable Mu tube gain structure. This means it is not before or after the compression section, it is within it. The EQ circuit is inductor based and has wide curves for giving program material that “little something”. There is also a two frequency low cut for tightening up out of control bass. The boost of the bands can be 5dB or 3dB split between 5 steps. I spent a lot of time shaping this EQ mastering everyday and fine tuning the components on the weekends. It sounds absolutely fabulous.”

Mastering Compressor WiN

Team TCD | 26 September 2025 | 35.25 MB

…: x64: AAX, VST3, VST2 | x86: JBridge :…

Shadow Hills Mastering Compressor – Tame your dynamics with tremendous tone and precise control The supreme tycoon of master bus compression Meticulously modeled by Brainworx after the instantly legendary hardware original, no details have been spared in crafting this digital version of one of the most musical and versatile compressors out there. A well known staple in the music industry, the Shadow Hills compressor easily tames even the most unruly and chaotic transients with flawless control and amazing tone. It’s no wonder that it has been the go-to buss compressor on timeless records by Radiohead, Foo Fighters, Beck, Green Day, Coldplay and countless others.

Loudness Contour v5.5.9 WiN

Team BLiZZARD | 17 June 2026 | 55MB

Real-time equal-loudness Contour Shaping

APU Loudness Contour is a real-time equal-loudness filter that offers precise control over a wide range of perceptual loudness contours, including ISO 226 (2003 & 2023), Fletcher-Munson, K-weighting, A/C-weighting, ECMA-418, and ITU-R 468. Each contour is normalized to 0 dB at 1 kHz and includes a dedicated contour weight parameter, allowing you to scale the frequency response in both positive and negative directions. A weight of 0% results in a flat response, while negative weights invert the contour. ISO 226 and Fletcher-Munson curves support variable reference levels from 20 dB SPL to 120 dB SPL, with smooth interpolation between phon curves.

Loudness Leveler v5.5.9 WiN

Team BLiZZARD | 17 June 2026 | 28 MB

APU Loudness Leveler is a real-time volume leveler/rider designed to keep audio within your target loudness range in real-time. Set a target loudness, choose a tolerance, and the leveler continuously applies gain correction to keep dialog, vocals, podcasts, streams, or program material hovering around the level you want. The Leveler is designed to be “set it and forget it” for real-time loudness control. Configurable timing modes cover fast momentary riding, slower short-term correction, and a traditional RMS mode. Guard modes, sidechain control, predictive low-latency operation, detector EQ, and built-in limiting provide plenty of tools to keep the leveler working smoothly in a wide range of real-world scenarios. The built-in guard mode is especially useful for keeping the leveler from boosting into tails or cutting into transients, while the low-level handling modes can keep it from overreacting to noise and ambience when the source gets quiet.

APU TrueGain v5.5.9 WiN

Team BLiZZARD | 17 June 2026 | 218.45MB

..: STANDALONE | VST2 | VST3 | AAX :..

APU TrueGain Perceptual Gain Control.

APU TrueGain is a powerful utility plugin which corrects for a fundamental challenge in audio engineering: a mix’s tonal balance changes depending on the listening level. By modeling the human ear’s frequency sensitivity at different Sound Pressure Levels (SPL), TrueGain allows you to audition and control your audio with perceptual consistency. The core of TrueGain is its ability to perform “translation checks.” After a simple one-time calibration to your monitoring setup, you can use TrueGain to simulate how your mix will sound at different loudness levels, all without changing the actual volume of your monitors or headphones. This allows you to quickly check how the bass will hold up or if the vocals will become harsh in quieter listening environments, ensuring your mix translates reliably.

Verberate Immersive v2.3.2 WiN MAC

Team R2R | 12 July 2025 | WiN: 14.22MB | MAC: 32.76MB

PLATFORM: AU/VST/VST3/AAX/x86/x64

Verberate Immersive 2 is a surround reverb and a 3D capable edition of Verberate 2 — our algorithmic reverb plug-in that simulates real acoustical spaces with exceptional realism. Verberate Immersive 2 replaces Verberate Surround and supports all common surround and immersive formats up to 7.1.6 channels. The new Vivid Hall algorithm adds time variance to avoid the stiffness that plagues convolution based reverbs while preserving the natural high density reverb tails of Verberate Surround 1.

Pod Farm Platinum v2.59 WiN

Team R2R | 14 February 2017 | 124 MB

WiN32/64 – EXE/VST/RTAS

POD Farm® 2.5 is a premium tone plug-in that brings world-renowned POD® tone to your favorite DAW. Using a simple carousel-style gear browser, choose from an arsenal of vintage and modern amps, cabs, studio-standard effects, classic stompboxes and colorful preamps. Each model is fully adjustable, and a lightning-fast workflow makes it easy to create classic tones and imaginative hybrids. Or you can choose from more than 1000 presets and dial up timeless tones in an instant. POD Farm 2.5 is more than just a plug-in—it’s a dream collection of gear for guitarists, bassists and vocalists.