Shinechilla v1.2 WiN MAC

Team R2R | 09 August 2020 | WiN: 7 MB | OSX: 16.7 MB

WiN32/64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

Shinechilla allows you to generate and blend 2nd, 3rd and 4th harmonics with the original dry sound. The harmonic generation process offered by Shinechilla is quite unique on the plugin market since it produces almost no intermodulation distortion. Shinechilla is mainly usable for solo instrument processing where it literally “shines” by producing convincing and full-bodied harmonic coloration. Shinechilla is also unique in that it is able to add harmonic coloration on top of the sound instead of distorting the whole sound. However, the option to saturate the whole sound is also available. The strength of harmonic coloration added by Shinechilla can be flexibly adjusted over the whole frequency range, for each harmonic. In overall, Shinechilla is a great tool for contemporary electronic music producers and sound designers looking for impressive timbres and sounds.

OVC-128 v1.4 WiN MAC

Team R2R | 09 August 2020 | WiN: 6.6 MB | OSX: 15.8 MB

…::: AU, AAX, VST, VST3, x86, x64 :::…

OVC-128, a massively-oversampled soft/hard clipping effect plug-in for professional music production applications, available in AAX, AudioUnit, VST and VST3 plug-in formats (including native 64-bit support), for macOS (v10.7 and later), and Windows computers. OVC-128 is a massively-oversampled soft/hard clipping effect plug-in for professional music production applications. A common use for this plug-in is hard-clipping before the final peak limiter. This is an effective approach in contemporary electronic music when loudness is boosted using a clipper plug-in while minor excessive peaks are absorbed by a final peak limiter that applies no additional gain itself. Clipping the tracks via OVC-128 is practically similar to clipping using high-quality outboard analog gear. At 44.1kHz source sample rate, the internal audio sample rate of OVC-128 is a whopping 5.6 MHz!

Spatifier v1.4 WiN MAC

Team R2R | 10 Aug 2020 | WiN: 6.9 MB | OSX: 16.2 MB

…::: AU, AAX, VST, VST3, x86, x64 :::…

Spatifier is a “mono to stereo” spatial enhancer AU and VST plugin for professional sound and music production applications. This plugin can be effectively used to turn mono tracks into spatially-enhanced stereo tracks: it works great for clean and distorted guitars, synth instruments, piano, organ, back vocals and other sounds. Beside that Spatifier can be used to “densify” the sound of reverb sends, and to add “body” to thin and flat sounds. Spatifier decorrelates the signal in the left and right channels while retaining the “mono compatibility”. Such decorrelation creates the “as wide as possible” surround effect. This effect can be usually used in place of double-tracking technique. The spatial impression can be adjusted in the range from the “in your face” direct to a distant reverby sound.

EBusLim v1.4.1 WiN MAC

Team R2R | 9 August 2020 | WiN: 6.8 MB | OSX: 15.6 MB

EBusLim is a brickwall peak limiter and loudness maximization AAX, AudioUnit and VST plugin for professional streaming, sound and music production applications. EBusLim implements a single EL-4-based limiter mode originally designed in Elephant mastering limiter plug-in. This mode is suitable for bus, drum bus, master bus and track processing. The design idea behind EBusLim is to produce an extremely easy-to-use yet effective limiter. Since EBusLim only features a single processing mode the processing latency was reduced down to 0.5 milliseconds permitting the use of this limiter as master bus overload protector for both stereo and multi-channel real-time applications.

Drumformer v1.9 WiN MAC

Team R2R | 9 August 2020 | WiN: 7.8 MB | OSX: 18.4 MB

MultiBand Drum & Master Track Dynamics Processing Plug-in

Drumformer is a multiband drum and master track dynamics processing plug-in for professional music and audio production applications. Drumformer was designed to be a comprehensive solution for the broadest range of sound processing tasks, allowing you to easily implement almost any dynamics processing idea you may have. Drumformer can operate in broadband, 2-band and 3-band modes, with each band having compressor-expander and saturation modules. The sound of the compressor can be defined as “gluey with a ping”, because it instantly creates a “tight and glued together” sound while masterfully emphasizing the transients. The saturation module offers you a choice between six saturation modes, each having a smooth sound and differing harmonic content. Drumformer features a precise gate module with a round sound and multifaceted controls that is useful when you are processing a multi-tracked drum kit. The built-in parametric equalizer with its spectrum analyzer will also come in handy. The “Clipper” module which is a part of the plug-in allows you to get artistic master output clipping effects.

Deft Compressor v1.10 WiN MAC

Team R2R | 9 August 2020 | WiN: 7.2 MB | OSX: 17.2 MB

…::: AU, AAX, VST, VST3, x86, x64 :::…

Deft Compressor is an audio signal compressor plug-in for professional audio production applications. The characteristic feature of this compressor is its ability to produce “slim” and “slick” sounding compression, with intelligibility enhancement effect. Such result is achieved by compressor’s timing function that closely resembles the S-curve on both attack and release stages. S-curve timing function also helps compressor to sound “warm” and “clean” at most settings. While at high attack settings Deft Compressor can be used to emphasize audio transients, it can also be used to “smash” audio signal if you use attack settings as low as 0.1 millisecond. Deft Compressor also features a so called “vintage” compression mode which produces compression sound reminiscent of analog valve compressors: it produces a warm, gently saturated sound with the ability to overdrive the output signal. Deft Compressor is perfectly usable for compressing vocals, drums, guitars and other instruments, both technically and creatively. Beside that, it can be used to compress mix groups and full mixes.

CRTIV Reverb v2.2 WiN MAC

Team R2R | 9 August 2020 | WiN: 5.9 MB | OSX: 14.3 MB

(AU,VST,VST3,AAX*,x86,x64)

CRTIV Reverb is a stereo reverberation effect AAX, AU and VST plugin for professional music production applications. This reverb plug-in provides a wide palette of reverb spaces while requiring only a minimal effort to use. The tails created by this reverb are very dense and produce a well-defined spatialization. Since the reverb uses a kind of “true stereo” algorithm the panned sounds receive a good stereo field placement.