ToStereo v2.0 WiN

TEAM R2R | 03.04.2013 | 0.9 KB

PLATFORM: WiN32 – VST

ToStereo is a simple mono to stereo audio signal converter. It helping you to breathe new life into your digital audios mono, flat and dull. You can fine-tune the stereo width.

PS-1 Performance Synthesizer v1.2 WiN

Team DYNAMiCS | 09/16/2008 | 26.30 MB

The award winning PS-1 Performance Synthesizer is the result of an exciting collaboration between ProSounds and DASH Signature and has been designed with the advanced sound designer and electronic musician in mind, incorporating a large number of high-end features while still maintaining ease of use with its intuitive user interface. The PS-1 is a VST instrument plugin (VSTi) for Windows featuring four multi featured oscillators, custom WAV file import (with over 80 waveforms included!), a mixer, 2 resonant multimode filters (routable in both serial and parallel), two Low Frequency Oscillators (LFOs) and two ADSR envelope generators. The PS-1 also includes some advanced performance features, such as a powerful arpeggiator and trancegate, as well as an effects unit. The inclusion of an effects unit in the PS-1 means that where effects have been used in the sound design process they can be conveniently saved within an instrument patch with each sound for easy recall. The effects unit features four high quality effects including an ultra fat double chorus, a superb digital delay with modulation, a distortion unit, and a reverb unit.

Tape Cassette 2 v1.2.2 WiN MAC

FLARE | 07 August 2021 | WiN: 6.06 MB | MAC: 66.3 MB

..:: AU, AUv3, VST3, x64 & AAX ::..

Nostalgic Saturation Tape Cassette 2 is an audio plugin that emulates the warmth, noise and character of old tape cassettes. Following up from our well received Tape Cassette 1, we’ve updated the plugin with a sleek interface and more changes under the hood too. Along with a brand new selectable Type 1 Cassette Impulse Response (IR), we’ve improved the saturation algorithm, wow & flutter engine and implemented real sampled tape noise, all which results in a wonderfully warm and more accurate vintage sound. In addition to this you now have two VU meters to monitor your audio as well as selectable oversampling. Now you can easily add that classic sound to an entire track or use it directly on individual channels for added movement, texture, and warmth. Alternatively you can take it further than the material limitations of tape and push the parameters into a far more experimental soundscape, as a sound design tool.

Schlap v1.0.7 WiN MAC

FLARE | 07 August 2021 | WiN: 3.96 MB | MAC: 7.41 MB

..:: AU, AUv3, VST3, x64 & AAX ::..

If you want your tracks to be energetic, in-your-face and bold, make ’em “Schlap”. Schlap is a characterful, colourful and aggressive sounding program-dependent compressor. It takes inspiration from hardware RMS compressors of the past and evolves them into a modern setting. The compressor uses a program-dependent attack and release influenced by old hardware making the compression sound characterful and dynamic. The RMS detection means that Schlap detects the average loudness of a signal, resulting in sudden short peaks being uncompressed so that they can attack hard and sound heavy hitting. Also inherently in RMS detection, there is a slight delay in compression which allows the initial, early transients to sneak through uncompressed so they keep their punch. You’ve got a safe, controlled track you think you’re happy with, but you have to ask yourself… “Does it Schlap?”

Pendulum v1.1 WiN MAC

Team R2R | 2013.04.22 | WiN: 1.25 MB | MAC: 1 MB

Torsion Pendulum is a simulator of nonlinearity. It can be used for distortion audio signal and harmonics saturation. There are two algorithms used for simulation of nonlinearity.

Syflex Sylfid-f1 v1.0 WiN MAC

TEAM R2R | 2014.03.05 | 1.8 MB

Sylfid-f1 is a string instrument based on Syflex’s powerful physical modeling technology. Although similar to a piano (strings, hammer, damper), the goal is not to model an existing instrument, but to create a new one. Thanks to Syflex’s fast simulation technology, the string vibrations can be computed in real-time. Sylfid doesn’t use any samples: everything is computed on the fly. This gives the freedom to change any parameter of the model, allowing to tune the instrument in many different ways, and to produce a wide variety of different sounds. For instance, it is possible to change the material the strings are made of, from plastic to metal, or adjust the shape and hardness of the hammer along with its position on the strings. All these properties can be modified on a per string basis.

Sylfid-f2 v1.0 WIN MAC

TEAM R2R | 2014.03.05 | 1.13 MB

Sylfid-f2 is a new physical modeling string plug-in that models a musical instrument that has two strings per note. It doesn’t use any samples: everything is computed using a fast simulation algorithm. It computes the propagation of waves on the strings, and converts them to sounds in real time. This allows creation of sounds that exhibit real-life properties like long decays, without any samples, no loops and no reverb. The material of the strings can be changed continuously from metal to plastic. The plug-in is based on the same technology as Sylfid-f1, but is less complex to tune. For example the strings material cannot be changed on a per string basis and the hammer position is fixed.