Polysquasher v3.2 WiN MAC

Team R2R | 09 August 2020 | WiN: 7 MB | OSX: 16 MB

AU, AAX, VST, VST3, x86, x64

Polysquasher is a mastering compressor AU and VST plugin for professional audio and sound production applications. Polysquasher was designed with a main goal: to be transparent. Transparent compression action is a cornerstone for any mastering compressor. Transparency of audio signal processing is necessary to preserve all existing elements in the mix, while compression itself is necessary to make the mix sound uniform to other mixes (tracks) and to make it sound more solid and “glued”. Polysquasher achieves its goal by using a unique compression algorithm which requires a small number of parameters – basically threshold and ratio only – making this compressor a joy to use. More advanced settings are hidden in the “compressor mode editor” panel where you can create your own compressor modes that can be easily recalled later.

PHA-979 v2.8.0 WiN MAC

Team R2R | 09 August 2020 | WiN: 6.5 MB | OSX: 14.9 MB

PHA-979 is a professional audio AU and VST plugin which allows you to apply an arbitrary phase shift to sound material. What is meant by the phase shift here is simultaneous shifting of all frequencies across the active frequency range of the signal by the given value in degrees. This is achieved by linear-phase design. PHA-979 is useful during mixing sessions, especially when working with the sound material recorded through an array of microphones. In many cases this allows you to solve various phasing problems arising from the microphone placement chosen during the tracking session. In other cases this process may help you to align drums and other instruments to each other bringing punch and time coherence not attainable by the ordinary time-aligning alone. Beside the phase shifting, PHA-979 features positive and negative time delaying that eliminates the need to move in-track events in the sequencer when doing time alignment over any set of recorded tracks. PHA-979 also provides mid/side channel balance and panning controls that permit you to record stereo microphone pairs into a single stereo track without resorting to dual mono recording (on separate tracks) which usually becomes time-consuming in a further editing.

Warmifier v2.4 WiN MAC

Team R2R | 09 August 2020 | WiN: 6.0 MB | OSX: 14 MB

Warmifier is a special plug-in for professional music production applications which processes audio signal in a way similar to analog valve equipment. By using Warmifier you can achieve valve warming and “console” coloration effects. Warmifier is applicable both to the complete mixes and to the individual instrument tracks. You have several parameters at your disposal that allow you to control the strength and the color of the effect. Also, you have several valve types to choose from. Each valve type offers a different overall coloration. While the effect of this plug-in is definitely subtle, the difference it makes is similar to the difference in sound between different analog mixing consoles. In most cases it boils down to adding a subtle “sparkle”, “presence”, “warming” or “solidifying” effect to a sound track it was applied to.

VariSaturator v2.1 WiN MAC

Team R2R | 09 August 2020 | WiN 7 MB | OSX 16 MB

WiN32/64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

VariSaturator is an audio effect AU and VST plugin designed to apply saturation effects to audio material. VariSaturator can be used both to boost the loudness of the audio tracks without increasing their peak levels proportionally, and to apply subtle harmonic coloration that makes tracks sound more pronounced and polished.  VariSaturator features two saturation modules which are applied in sequence, in two-band mode each. The valve saturation module applies asymmetric valve processing that closely resembles sound of a high-quality valve amplifier cascade. Another saturation module VariSaturator features is a digital “waveshaping” saturator with feedback topology. This module applies smooth two-band saturation which can amplify signal level and apply desirable harmonic coloration. If you have some “muffled” track in the mix that needs to cut through the mix better, VariSaturator will help you in this case easily.

Soniformer v3.11 WiN MAC

Team R2R | 09 August 2020| WiN: 7.5 MB | OSX: 18 MB

WiN32/64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

Soniformer is a spectral mastering dynamics processor plug-in for professional music production applications.  During its operation, Soniformer splits incoming sound signal into 32 spectral bands.  This makes Soniformer a powerful and precise tool for mastering and sound restoration purposes.

Voxformer v2.18 WiN MAC

Team R2R | 09 August 2020 | WiN: 8.2 MB | OSX: 19.2 MB

WiN32/64: VST/VST3/AAX | MAC: AU/VST/VST3/AAX

Voxformer is a multi-functional vocal channel strip plug-in. Combining several professional quality processing modules, Voxformer was designed to be a comprehensive solution for all your vocal processing needs – be it spoken or sung vocals.

OVC-128 v1.4 WiN MAC

Team R2R | 09 August 2020 | WiN: 6.6 MB | OSX: 15.8 MB

…::: AU, AAX, VST, VST3, x86, x64 :::…

OVC-128, a massively-oversampled soft/hard clipping effect plug-in for professional music production applications, available in AAX, AudioUnit, VST and VST3 plug-in formats (including native 64-bit support), for macOS (v10.7 and later), and Windows computers. OVC-128 is a massively-oversampled soft/hard clipping effect plug-in for professional music production applications. A common use for this plug-in is hard-clipping before the final peak limiter. This is an effective approach in contemporary electronic music when loudness is boosted using a clipper plug-in while minor excessive peaks are absorbed by a final peak limiter that applies no additional gain itself. Clipping the tracks via OVC-128 is practically similar to clipping using high-quality outboard analog gear. At 44.1kHz source sample rate, the internal audio sample rate of OVC-128 is a whopping 5.6 MHz!