OVC-128 v1.4 WiN MAC

Team R2R | 09 August 2020 | WiN: 6.6 MB | OSX: 15.8 MB

…::: AU, AAX, VST, VST3, x86, x64 :::…

OVC-128, a massively-oversampled soft/hard clipping effect plug-in for professional music production applications, available in AAX, AudioUnit, VST and VST3 plug-in formats (including native 64-bit support), for macOS (v10.7 and later), and Windows computers. OVC-128 is a massively-oversampled soft/hard clipping effect plug-in for professional music production applications. A common use for this plug-in is hard-clipping before the final peak limiter. This is an effective approach in contemporary electronic music when loudness is boosted using a clipper plug-in while minor excessive peaks are absorbed by a final peak limiter that applies no additional gain itself. Clipping the tracks via OVC-128 is practically similar to clipping using high-quality outboard analog gear. At 44.1kHz source sample rate, the internal audio sample rate of OVC-128 is a whopping 5.6 MHz!

Warmifier v2.4 WiN MAC

Team R2R | 09 August 2020 | WiN: 6.0 MB | OSX: 14 MB

Warmifier is a special plug-in for professional music production applications which processes audio signal in a way similar to analog valve equipment. By using Warmifier you can achieve valve warming and “console” coloration effects. Warmifier is applicable both to the complete mixes and to the individual instrument tracks. You have several parameters at your disposal that allow you to control the strength and the color of the effect. Also, you have several valve types to choose from. Each valve type offers a different overall coloration. While the effect of this plug-in is definitely subtle, the difference it makes is similar to the difference in sound between different analog mixing consoles. In most cases it boils down to adding a subtle “sparkle”, “presence”, “warming” or “solidifying” effect to a sound track it was applied to.

TransGainer 1.10 WiN MAC

Team R2R | 09 August 2020 | WiN: 6.8 MB | OSX: 15.9 MB

…::: AU, AAX, VST, VST3, x86, x64 :::…

TransGainer, an audio plug-in suitable for a wide range of professional music production uses, implements an audio signal envelope adjustment algorithm that reacts on transients rather than on a signal’s loudness level. This algorithm allows you to adjust volume of attack and sustain stages of any sounds you use it on. TransGainer was designed in a way to be suitable for all possible sound sources – be it individual tracks or full mixes. In many cases TransGainer can be used in place of gate and expander plug-ins while delivering a better sound and offering an easier control. Beside that, TransGainer can be used for audio recording restoration/re-mastering purposes and reverb tail modifications with excellent results.

Powershaper v1.2 WiN MAC

Team R2R | 09 August 2020 | WiN: 6.1 MB | OSX: 17.4 MB

WiN32/64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

Powershaper is a saturation, distortion and overdrive effect plug-in for professional music production applications. Powershaper’s approach to saturation is quite unique as it works in multi-stage manner utilizing dozens of saturation stages in a specified variation. While Powershaper was designed to apply extreme saturation, it can be also used to boost presence of audio tracks subtly. The flexibility of this saturation plug-in is most apparent when applying saturation to the drums: it is possible to dial settings that retain or even extend the punch while applying strong pleasant coloration and presence effect.

PHA-979 v2.8.0 WiN MAC

Team R2R | 09 August 2020 | WiN: 6.5 MB | OSX: 14.9 MB

PHA-979 is a professional audio AU and VST plugin which allows you to apply an arbitrary phase shift to sound material. What is meant by the phase shift here is simultaneous shifting of all frequencies across the active frequency range of the signal by the given value in degrees. This is achieved by linear-phase design. PHA-979 is useful during mixing sessions, especially when working with the sound material recorded through an array of microphones. In many cases this allows you to solve various phasing problems arising from the microphone placement chosen during the tracking session. In other cases this process may help you to align drums and other instruments to each other bringing punch and time coherence not attainable by the ordinary time-aligning alone. Beside the phase shifting, PHA-979 features positive and negative time delaying that eliminates the need to move in-track events in the sequencer when doing time alignment over any set of recorded tracks. PHA-979 also provides mid/side channel balance and panning controls that permit you to record stereo microphone pairs into a single stereo track without resorting to dual mono recording (on separate tracks) which usually becomes time-consuming in a further editing.

Soniformer v3.11 WiN MAC

Team R2R | 09 August 2020| WiN: 7.5 MB | OSX: 18 MB

WiN32/64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

Soniformer is a spectral mastering dynamics processor plug-in for professional music production applications.  During its operation, Soniformer splits incoming sound signal into 32 spectral bands.  This makes Soniformer a powerful and precise tool for mastering and sound restoration purposes.

Bitwig Studio v3.1.2 WiN LiNUX

P2P | 11 February 2020 | WiN: 202 MB | LiNUX: 292 MB

Bitwig Studio is a dynamic software for creating and performing your musical ideas in the studio and on stage. Bitwig Studio inspires you to take greater control of your music, giving you access to every aspect of your production. Streamline your creative process and quickly evolve your ideas into complete songs, tracks, and compositions. Record and arrange, improvise and perform, or do it all at once. Welcome to the next generation of music creation and performance software.