APU Dynamics Optimizer WiN MAC

Team BTCR | 28 November 2025 | 30 MB

….: STANDALONE: x86, x64 :….

The APU Dynamics Optimizer is a dynamics optimization tool designed to support modern loudness types (LUFS, True Peak). Underneath the hood, the optimizer uses the same compression engine as the APU Loudness Compressor, but benefits from the full audio waveform instead of real-time measurements. This allows the gain envelope to be meticulously optimized across the entire waveform. The design of this tool allows you to very precisely target a specific average LUFS and dynamic range. Once the gain envelope has been optimized, you can playback the result in real-time while adjusting the character of the sound with the same collection of parameters from the compressor plug-in.

Loudness Contour v4.6.1 WiN MAC

Team BTCR | 28 November 2025 | 131 MB

Real-time equal-loudness Contour Shaping

APU Loudness Contour is a real-time equal-loudness filter that offers precise control over a wide range of perceptual loudness contours, including ISO 226 (2003 & 2023), Fletcher-Munson, K-weighting, A/C-weighting, ECMA-418, and ITU-R 468. Each contour is normalized to 0 dB at 1 kHz and includes a dedicated contour weight parameter, allowing you to scale the frequency response in both positive and negative directions. A weight of 0% results in a flat response, while negative weights invert the contour. ISO 226 and Fletcher-Munson curves support variable reference levels from 20 dB SPL to 120 dB SPL, with smooth interpolation between phon curves.

Loudness Limiter v4.6.1WiN MAC

Team BTCR | 28 November 2025 | 56.8MB

PLATFORM: AU/VST2/VST3/AAX

The APU Loudness Limiter is a real-time limiter designed to support multiple loudness types simultaneously. The limiter can be configured to use LUFS, True Peak, RMS, and/or Peak loudness types. This allows you to target multiple requirements simultaneously, such as a specific LUFS target and a specific True Peak target. Internally, the ballistics of the limiter are adjusted to accommodate the different loudness type limiter settings.

APU TrueGain v4.6.1 WiN MAC

Team BTCR | 28 November 2025 | 301MB

..: AU | VST2 | VST3 | AAX :..

APU TrueGain Perceptual Gain Control.

APU TrueGain is a powerful utility plugin which corrects for a fundamental challenge in audio engineering: a mix’s tonal balance changes depending on the listening level. By modeling the human ear’s frequency sensitivity at different Sound Pressure Levels (SPL), TrueGain allows you to audition and control your audio with perceptual consistency. The core of TrueGain is its ability to perform “translation checks.” After a simple one-time calibration to your monitoring setup, you can use TrueGain to simulate how your mix will sound at different loudness levels, all without changing the actual volume of your monitors or headphones. This allows you to quickly check how the bass will hold up or if the vocals will become harsh in quieter listening environments, ensuring your mix translates reliably.

APU Loudness Compressor v4.6.1 WiN MAC

Team BTCR | 28 November 2025  | 70 MB

The APU Loudness Compressor plug-in is a compressor/expander designed to support modern loudness types (LUFS, True Peak). Typical compressors operate using only RMS and/or Peak units of measurement. But technology has come a long way since then and we’re overdue for an upgrade.. This compressor uses modern industry standard LUFS units of measurement to provide a far more transparent response which is connected to the way humans actually experience loudness. The entire signal flow of the compressor operates within this more precise understanding of loudness. The plug-in user interface provides a more flexible alternative to traditional threshold-and-ratio style of compressor controls. Instead, source and target ranges of loudness can be configured and the compressor will either compress or expand as needed.

RRS Plugins Bundle 2024.11 WiN

Team R2R | 25 November 2024 | 287.61 MB

…: AAX, VSTi, VST2, VST3, x64 :…

RRS AQ550 | RRS AQ550b | RRS AQ560 | RRS Bass Enhancer | RRS BQ-A | RRS Comp 609 | RRS EQ3 | RRS EQP-1A | RRS Exciter | RRS Fuse Stereo Image | RRS SA360 | RRS uniQ | RRS Ivoks | RRS EQ302 | RRS EQ560 FREE | RRS HLF-3C | RRS SA60

NightSky Plugin WiN MAC

Teams R2R/GUiSEPPE[ARM]| 28.01.2026 | WiN:9.7MB | MAC:25.7MB

Warp Space and Time | Reverb Pedal

Forget what you know about reverb, and prepare to experience ambience in a completely new way. With the NightSky plugin, you can create vast soundscapes from just a few notes, and apply pitch and harmonic manipulation to your reverb tails with synth-like filter sweeps. It fundamentally changes what’s possible in the world of reverb, bringing new sonic inspiration with every twist of a control.