Haaze v1.0.0 VST x86 x64 WiN

Team V.R | Dec 22 2017 | 10.82 MB

Haaze provides two different ways of making a mono (or a not-wide-enough-stereo) signal to a wider stereo signal. By splitting the input signal into 16 different frequency regions, spanning from 20 Hz to 20kHz, Haaze can add different amount of stereo-widening to different frequency regions. This makes it possible to transform a mono track into a natural sounding stereo track (by for example keeping lower frequencies in mono while spreading the higher ones). Haaze is using two different stereo widening techniques, Haas (short delays between left and right channel) and ”Split EQ” (different gain on different channels on different frequency regions).

Kuvert v1.0.1 WiN

Team V.R | Dec 22 2017 | 4.4 MB

(Win32/64; VST3, VST)

Kuvert defines a whole new way of dealing with effects. In short, Kuvert allows you to draw five different envelopes. These envelopes control different effect parameters, and can be drawn freely or onto a grid. The envelopes are looped, while the incoming audio isn’t (unless you’re feeding it looped material of course). This is a powerful & fun way of altering your sounds to reach a whole new level, sometimes not even recognizable! Thanks to the looping nature of the plug-in, it will fit very well into any musical context. One way of using it would be to revitalize any looped material (such as beats) within just a few seconds.

Gaffel v1.0.2 WiN

Team V.R | Dec 22 2017 | 2.9 MB

(Win32/64; AAX*, VST3, VST)

Gaffel* is a tool that splits audio into different frequency bands. Using it on multiple channels lets the user create multiband effect(s) out of any other plugin installed. Frequency parameters are globally synchronized between different instances of the plug in if they’re set to the same group, which makes it really convenient to work with in any DAW.

Grand Finale v1.0.2 WiN

Team V.R | Dec 22 2017 | 8.7 MB

(Win32/64; AAX*, VST)

Grand Finale is a multi effect plug-in designed for finalizing complete mixes, stems, buses and/or individual audio tracks. The plug-in offers several modules in a pre-routed configuration. Each module has parameters to alter, and most modules offer a set of algorithms to select. These features come together to make Grand Finale a powerful tool for quickly finalizing a track, bus or mix. Usage: Trim the input signal, add your desired amount of compression, multi-band compression, stereo width, EQ, blend in some add compression and/or distortion, and glue it all together by balancing the input and output trim. Use the meters to monitor and and adjust your output level to whatever destination (for example, YouTube recommends -14 LUFS)

SquashIt v1.0.2 WiN

Team V.R | Dec 22 2017 | 1.6 MB

(Win32/64; AAX*, VST3, VST)

This audio effect filter provides an unique distortion algorithm and should be essential in every music producers toolset. SquashIt doesn’t sound vintage, it just sounds good. SquashIt is developed by musicians for musicians.

Korvpressor v1.0.2 WiN

Team V.R | Dec 22 2017 | 1.6 MB

(Win32/64; AAX*, VST3, VST)

If you work with audio, you’ll eventually need a good compressor in your toolbox. Korvpressor* is an adaptive compressor / limiter that’s usable in many different ways. It has a super-simple UI, a whole new ”physical” take on how to tame and visualize a compressor. The controls are minimal – set the input gain, level of compression, and the output gain. However, don’t be mislead by this simplicity. Under the hood is a sophisticated set of algorithms, developed together with a team from the KTH Royal Institute of Technology in Stockholm. The compression algorithm was designed with transparency in mind, and Korvpressor will sound great on almost any kind of sound; all from a vocal track to a full blown mix. If you push it even harder, it gives a nice squeezing effect.

R0Verb v1.0.2 WiN

Team V.R | Dec 22 2017 | 2.4 MB

(Win32/64; AAX*, VST3, VST)

This audio effect filter is a hybrid between a simple reverb and a very complex delay. R0Verb consists of up to 50 separate delay lines, and puts you in charge of every single delay with controls for volume, pre-delay, feedback & high shelf. It can be used for everything from simple delays to complex spaces, whatever your mix needs. It also has a nice Randomizer if you’re feeling lucky!