TransReckon v1.1.0 WiN

TEAM V.R | Dec 24 2017 | 5.33 MB

AAX VST2 VST3 x86 x64

TransReckon is a transient processor that will help you to add punch to your drum lines or put some instruments forward (or backward) in an extremely efficient way and with unexpected ease. TransReckon provides ‘Length’ and ‘Sensivity’ controls, a ‘Listen’ mode, a ‘Flat Sustain’ option and an integrated brickwall limiter. These options help to go further with the transient shaping process. They can be used to reduce artefacts when processing specific instruments (guitars, …) but they also offer new creative possibilities (gate and “pre-delay” effects on a natural reverb).

EARebound v1.1.0 WiN

TEAM V.R | Dec 24 2017 | 5.73 MB

VST2 VST3 x86 x64

EARebound is a full-featured multi-delay plug-in which has been designed to meet a specific need : to quickly create rhythm lines from percussive sounds recorded in various environments (natural, urban, industrial, …). Recording these sounds, processing them through (carefully selected) effects in order to obtain multiple versions of them, loading and mapping them in a sampler, placing them in space, … takes a considerable amount of time and can be an obstacle to spontaneous creativity. In addition, even if we are satisfied with the results after hours of hard work, this rhythmic grail cannot be easily modified, as we would like, during live situations.

Efektor Modulation Bundle v1.0.1 WiN

Team V.R | Dec 23 2017 | 24.2 MB

Chorus, Flanger, Phaser, and Tremolo

(Win32/64; AAX*, VST3, VST)

Following the footsteps of our Efektor Distortion Bundle, the newest addition to the Efektor series we studied and examined more than 20 models of fabled modulation effects from the 1950s to the last decade. Modulation type effects are widely used by organ/synth players, guitarists, and studio engineers to add width, depth, and movement to the original sound. In this latest bundle, we collect the prominent ones and packed them into four devices.

Vandelay v1.0.0 WiN

Team V.R | Dec 22 2017 | 1.71 MB

(Win32/64; VST3, VST)

Vandelay provides three separate delays in as many frequency regions. Each delay has an LFO that modulates the pitch of the audio stream. Together with tempo based delay times and feedback control you can create a very rich sound from almost any source. Sporting a clever, responsive and intuitive user interface, Vandelay is easily controlled and you will almost certainly get the hang out of it in minutes!

PressIt v1.0.0 WiN

Team V.R | Dec 22 2017 | 2.36 MB

(Win32/64; VST3, VST)

PressIt is a very sophisticated dynamic tool, best used as a master plugin, or to tighten up bus masters. It works really well on drums, but also background vocals or other stems that need to be tamed will fit well. PressIt consists of three compressors who work independently of each other. They are fed with the low, mid & high frequency band of the incoming audio signal. The compressor units consist of our unique algorithm from Korvpressor, developed together with engineers from KTH (Royal Institute of Technology) in Stockholm. They gently shape the three signals (with full control), and then sums it back into a nice unity. Before the audio leaves the plugin, there’s an optional brick-wall limiter to prevent digital distortion.

Pads v1.0.2 VST2 x86 x64 WiN

Team V.R | Dec 22 2017 | 13.29 MB

Pads is a thriving and organic pad synthesizer. It consists of a wavetable synth with a noise/grain generator and a high cut filter. With a carefully developed ”wobbler” that detunes the waveforms and makes very small inconsistencies to several internal parameters and a nice sounding chorus, this synthesizer is able to create some really interesting and non-statical pad sounds.

Haaze v1.0.0 VST x86 x64 WiN

Team V.R | Dec 22 2017 | 10.82 MB

Haaze provides two different ways of making a mono (or a not-wide-enough-stereo) signal to a wider stereo signal. By splitting the input signal into 16 different frequency regions, spanning from 20 Hz to 20kHz, Haaze can add different amount of stereo-widening to different frequency regions. This makes it possible to transform a mono track into a natural sounding stereo track (by for example keeping lower frequencies in mono while spreading the higher ones). Haaze is using two different stereo widening techniques, Haas (short delays between left and right channel) and ”Split EQ” (different gain on different channels on different frequency regions).