M.T.M Plugins v2026.09 MAC

Team MORiA | 16 September 2026 | 679.47MB

..: AAX, AU, VST3, STANDALONE, 64Bit :..

Loudness Contour v5.5.9 WiN

Team BLiZZARD | 17 June 2026 | 55MB

Real-time equal-loudness Contour Shaping

APU Loudness Contour is a real-time equal-loudness filter that offers precise control over a wide range of perceptual loudness contours, including ISO 226 (2003 & 2023), Fletcher-Munson, K-weighting, A/C-weighting, ECMA-418, and ITU-R 468. Each contour is normalized to 0 dB at 1 kHz and includes a dedicated contour weight parameter, allowing you to scale the frequency response in both positive and negative directions. A weight of 0% results in a flat response, while negative weights invert the contour. ISO 226 and Fletcher-Munson curves support variable reference levels from 20 dB SPL to 120 dB SPL, with smooth interpolation between phon curves.

Loudness Leveler v5.5.9 WiN

Team BLiZZARD | 17 June 2026 | 28 MB

APU Loudness Leveler is a real-time volume leveler/rider designed to keep audio within your target loudness range in real-time. Set a target loudness, choose a tolerance, and the leveler continuously applies gain correction to keep dialog, vocals, podcasts, streams, or program material hovering around the level you want. The Leveler is designed to be “set it and forget it” for real-time loudness control. Configurable timing modes cover fast momentary riding, slower short-term correction, and a traditional RMS mode. Guard modes, sidechain control, predictive low-latency operation, detector EQ, and built-in limiting provide plenty of tools to keep the leveler working smoothly in a wide range of real-world scenarios. The built-in guard mode is especially useful for keeping the leveler from boosting into tails or cutting into transients, while the low-level handling modes can keep it from overreacting to noise and ambience when the source gets quiet.

APU TrueGain v5.5.9 WiN

Team BLiZZARD | 17 June 2026 | 218.45MB

..: STANDALONE | VST2 | VST3 | AAX :..

APU TrueGain Perceptual Gain Control.

APU TrueGain is a powerful utility plugin which corrects for a fundamental challenge in audio engineering: a mix’s tonal balance changes depending on the listening level. By modeling the human ear’s frequency sensitivity at different Sound Pressure Levels (SPL), TrueGain allows you to audition and control your audio with perceptual consistency. The core of TrueGain is its ability to perform “translation checks.” After a simple one-time calibration to your monitoring setup, you can use TrueGain to simulate how your mix will sound at different loudness levels, all without changing the actual volume of your monitors or headphones. This allows you to quickly check how the bass will hold up or if the vocals will become harsh in quieter listening environments, ensuring your mix translates reliably.

SweetPoint v1.0.5 WiN

MOCHA | 16 June 2025 | 35.5 MB

The Ultimate Tool for Enhancing Your Stereo Field

Explore Creative Possibilities and Discover New Sweet Points

Phonograin v1.2.8 WiN

MOCHA | 16 June 2025 | 7.8 MB

Use each grain and discover the infinity of possibilities

Amplifikation-360 v1.3.4 WiN

Team TCD | 01 June 2025 | 204.12 MB

(Win64; AAX*, VST3, VST, STANDALONE)

A wrapper, integrator, a host, or just lets say it’s a playground for guitarist. Mix, integrate, explore and perform with Amplifikations and Efektors you own, automatically added as building blocks inside Amplifikation 360. Amplifikation 360 is a modular “playground” for stacking pedals, amps, and cabs to create the perfect sound you want. Immediately combine every guitar plug-ins you own inside Amplifikation 360. Try routing Matchlock‘s Amp with Caliburn‘s Cabinet, add a series (and parallel routings) of Efektor pedals to get that spacey shoegazing wall of sound, bigger than live djent riffs, or even a trippy psychedelic leads. Amplifikation 360 is the answer for a fast patch design, thanks to its uniquely intuitive, single screen graphic interface.