WOK StepCut Modulated Filter v1.0 WiN

TEAM ST3RE0 | 10 NOVEMBER 2010 | 6.09 MB

This is a dual-modulated multi-filter! The cutoff of an LP/BP/HP-filter can be controlled by an LFO and/or a step sequencer. The step sequencer can also control the speed or the modulation amount of the LFO ! Both are synced to host. The LFO can also run at audio rates! (manual or by incoming MIDI notes). And if all this is not enough: both LFO and step sequencer can send their values as MIDI CC messages to control other plugins or synths !

PEEL v1.0.2 macOS

TRAZOR | 15 January 2022 | 6 MB

OPEN YOUR SOUND WITH PEEL.

Visualize your recordings, identify and select part of the signal. Solo, mute or route the parts for external processing. Get creative with your audio recordings and samples. PEEL isolates individual instruments or vocals in stereo recordings so you can solo, mute or route the audio for external processing. Got a song where the vocals are too loud? PEEL can route the vocals to a separate track in your DAW* so you can set level and pan as if it was before mixdown. Do you have a drum loop where you wish the snare had a little reverb on it? No problem! PEEL can help you extract the snare only and add any effect you want to it.

Perfect Room v1.2.2 WiN MAC

FLARE | 08 September 2021 | WiN: 5.22 MB | MAC: 7.98 MB

Classic algorithmic reverb plugins use a combination of short feedbacking delays to create the illusion of reverberation. These delays cause unwanted metallic resonances and sharp spikes in the reverb’s frequency response. The denise team challenged themselves to create something better – a perfect room – and invented their TXVerb technology. Using this technology, the denise Perfect Room doesn’t use delays for the tail and will enhance the character and colouration of any audio you run through it in an extremely natural way, sounding defined and tight from the lowest kick all the way up to the highest vocal.

HC38 Headphone Calibrator VST v1.0 WiN

TEAM ST3RE0 | 25/12/2011 | 5.24 MB

HC38 Headphone Calibrator lets the user match the sound of their headphones to that of their studio monitors. It is ideal for field work, when studio monitors are not present, or to mix using headphones. It works by simulating several aspects of monitoring in a room environment. The user can adjust crossfeed, sound absorption, and room reflection. Crossfeed is the merging of the sound coming from each speaker. The amount of crossfeed can be adjusted by choosing from three approximate speaker distances (3′, 5′, and 7′) and fine-tuned using the crossfeed fader. What’s truly unique about the HC38 is its capability to simulate the room environment. The user can select from 6 representative flooring and room treatment materials that affect the way the sound is absorbed and reflected. It also has the basic hi-pass and lo-pass filters so one can make adjustments based on the frequency response graph provided by the headphone manufacturer.

XCTR WiN MAC PROPER

TEAM BEAT | 11.10.2015 | 11.73 MB

.:AAX, VST2, VST3, AU, RTAS, x86, x64:.

XCTR is a multi band harmonic exciter based on our Head Crusher saturation. Harmonic exciters can give a shine to certain frequencies in the mix. They can be used on drums to make the cymbals shine, bring up the kick drum on a stereo bus, bring some life back into a dull instrument, or even some shine to the whole mix.

WiDE X v1.2 VST2 x86 WiN

MaGeSY® | 29.02.2020 | 2.99 MB

Stereo Tool for Bus or Mastering

FX Collection 2022 WiN MAC

MORiA | 05 March 2022 | WiN: 79.3 MB | MAC: 74.34 MB

..:: AU, VST, VST3, 64Bit ::..

Treat your sound right

The result of decades of dedicated research, analysis, and modelling, these 15 superb effects will totally transform the way you record and mix your music. Combining history’s finest outboard effects, console components, and pedals with fresh, contemporary features and abilities, FX Collection is an essential tool for the modern producer. We have spent years searching the globe for the finest hardware effects and studio gear around. This is the fruit of our labor.