AXTRO-DS-08 v1.0.0 WiN

SNEAKZ | 19 April 2025 | 12 MB

AXTRO-DS-08 is a .wav drum machine and an 808 modified drum machine! This plugin has twelve slots to load .wav files and twelve 808 pre-made drums…but modified! I have built twelve 808 drums, but modified …(not an emulation) that you can sequence with the powerful sequencers. It is also featured with 12 slots where you can load .wav files and also sequence. Choose which type you want to use for each drum, 808 drum or .wav file. For the .wav slots, you have reverse control and EG. Each of these slots, and also the 808 modified drums, count with BP Filter, LFO for LP and Pan plus independent effects: Compressor/EQ/Delay/Distortion and Master Reverb. There are also Master Effects: 15-Band Stereo EQ and Multiband Compressor plus a Peak Meter and a Freq. Analyzer! There is also a recording station that goes up to 16 bars, where you can record what happens in the plugin.

AXTRO-FM v1.0.0 WiN

SNEAKZ | 19 April 2025 | 11 MB

AXTRO-FM is an FM synthesizer! This plugin has 5 oscillators, a noise generator and 11 modes/algorithms The plugin brings 3 filters (BP/SV/BQ), a fancy envelope and LFOs stations plus a Chord control where you can create your own chords using up to 4 notes. There is a powerful note sequencer/piano roll plus 8 master effects: Compressor/EQ/Distortion/Delay/Chorus/Flanger/Phaser and Reverb that you can mix to the output with knobs. To finalize, a recording station up to 16 bars where you can record everything inside the synth… plus 512 presets designed in various categories.

AXTRO-MS v1.0.0 WiN

SNEAKZ | 19 April 2025 | 13 MB

AXTRO-MS is a multi-sampler plus a wavemorph synth! This plugin runs .wav / .sf2 and .sfz files. It also has a wavemorph oscillator where you can draw up to 3 waveforms and morph between them.! It brings a powerful Note Sequencer for each mode/sampler and 8 effects: Compressor, Equalizer, Distortion, Delay, Chorus, Flanger, Phaser and Reverb.. Run all samplers at same time or individualy. You can also record your loops and save them as .wav files to use them in other productions. The plugin brings a good soundbank for each mode. This soundbank is given when you acquire AXTRO-MS!

TAL-U-NO-LX V2 v5.1.3

Team R2R | 14 March 2026 | 44.9MB

…::: AAX, CLAP, VST3i, VSTi, x64 :::…

TAL-U-NO-LX is a fully rewritten emulation of the popular hardware with a new engine and GUI. Up to date zero feedback delay filters and carefully calibrated controls make this synth a good replacement for the analog device with all the advantages software plugins have. As an addition, the TAL_U-NO-LX also supports portamento and different filter LFO waveforms and some more useful features. An arpeggiator with different sync modes and hold function is also included. A very fast envelope with a smooth roll-off and emulated inaccuracy gives this synth the typical sound. The synth was calibrated after a hardware device that’s property of TAL.

TAL-Sampler v4.8.5

Team R2R | 14 March 2026 | 8.39 MB

PLATFORM: CLAP/VSTi/VST3/AAX*

TAL-Sampler is not just a sample player. It’s a full featured analog modeled synthesizer with a sampler engine as sound source, including a powerful modulation matrix and a high quality self-oscillating 24/12/6 dB low pass filter. Don’t expect a 40GB piano sample library with samples for every velocity or something similar. The idea is to bring back the fun sampling was in the good old times with small samples, fast loading times and an intuitive work-flow to create your own sample presets without getting lost in the settings.

TAL-Pha v1.3.9 WiN

Team R2R | 14 March 2026 | 8.73MB

PLATFORM: CLAP/VSTi/VST3/AAX*

TAL-Pha is an instrument plug-in that emulates the sound of the analog 80’s synthesizer Alpha Juno II (MKS-50 is the rack version). The plug-in produces the classic analog sound, combined with modern flexibility and many additional functions. The plug-in can read and convert sysex information from the hardware and can also be used as a controller.

TAL-J-8 v2.0.5 WiN

Team R2R | 14 March 2026 | 9.79 MB

x64: (VSTi, VST3, AAX*, CLAP)

The TAL-J-8 is a very accurate emulation of the popular 80’s hardware synthesiser and calibrated after our own Jupiter 8 device. All sounds are generated in realtime without the use of any samples with the same endless modulation possibilities like the hardware and useful additional features like the calibration section that can make the filter scream.