Zorba v1.1.3 WiN

Team R2R | 11 July 2026 | 15.35MB

The Tyrant – Forty years of analog DNA. One instrument.

Built on the P900 analog heritage, Zorba can be a Juno on your first patch, a Jupiter on your second, and something neither could have imagined on your third.

01 · Three Voices
Two morphing primaries. One dedicated sub.
– VCO1 and VCO2 share a single morph knob that slides continuously between saw, square, triangle, and sine. VCO3 is a fully independent sub oscillator reaching one octave below the main pair, with its own tune, gain, and filter routing.

02 · Two Filters, Four Modes
904-F State Variable. Singing through four zones.
– Two independent filters based on the 904-F State Variable design. Low-pass, band-pass, high-pass, notch, each with a resonance curve that passes through clean, self-oscillation, transformer saturation, and the Black Hole rebirth zone.

03 · 174 Routes
A mod matrix that connects almost anything.
– Ten sources reach 38 unique targets across the synthesizer. Every route has its own depth. Multiple sources can share a target and combine. No slot limits, no setup fee for getting started, the defaults make Zorba musical the moment a key is pressed.

v1.1.3 (30 June 2026)
– MIDI-Learn with full mapping management (save / load / default sets)
– Polyphonic Aftertouch: per-voice source with 20 destinations
– Breath Controller: new dedicated breath source
– Modulation matrix expanded to 208 routes (up from 174)

v1.0.8 (5 June 2026)
– VCO frequency range extended from 12 to 48 semitones
– EG attack now starts at 0.11 ms instead of 0.05 ms for a punchier initial transient
Fixed: H-SYNC now tracks correctly with the extended VCO frequency range
Fixed: VCO no longer phases when placed in a morph position
Fixed: VCF cutoff frequency point no longer misfires after a position change

INFO/DEMO/BUY: https://mage.si/zorba
Zorba v1.1.3 AAX VST3 x64 WiN-R2R
♪ Download ♪