• VH+ 412 P50E WAV

    VH+ 412 P50E WAV

    P2P | 10 May 2022 | 36.3MB

    The VH+ 412 P50E Cab Pack is based on a VHT Fatbottom 4×12 cabinet loaded with the original Eminence P50E Speakers. The tone is mean and aggressive with a thick low end, throaty midrange, and a top end with nice bite and air to give your tone presence and width in the mix. While this cabinet is typically used for heavier music, its forward midrange gives a “woodiness” to mid gain tones and sounds surprisingly good with clean amps. This Cab Pack features 136 Single Mic files captured with thirteen hand-selected microphones and 17 of York Audio’s famous Multi-Mic Mixes designed to give you killer results with minimal tweaking for a total of 153 IRs.

    Microphones used in this Cab Pack

    57m – Based on a modern Shure SM57
    57v – Based on a vintage Shure Unidyne III SM57
    58 – Based on a Shure SM58
    SM7 – Based on a vintage Shure SM7
    421m – Based on a modern Sennheiser MD421
    421v – Based on a vintage Sennheiser MD421
    906 – Based on a Sennheiser e906

    121- Based on a Royer R-121
    160 – Based on a Beyerdynamic M160
    313 – Based on a Shure KSM313
    N22 – Based on an AEA Nuvo N22

    U47 – Based on a Telefunken U47 large diaphragm tube condenser
    184 – Based on a Neumann KM 184 Small diaphragm condenser

    ROOM 1, 2, and 3 – Captured with a Telefunken U47
    REAR 1 and 2 – Captured with a Telefunken U47
    SIDE – Captured with a Telefunken U47
    SUM – Captured with AEA Nuvo N22

    All products have been tested with Fractal Audio Systems™, Line 6™, Strymon™, and Kemper™ hardware, as well as DAW plug-ins to ensure seamless integration with your digital modeling units.

    All Cab Packs come in .WAV format in 24-bit 96k, 48k, and 44.1k files.
    All IRs are 500ms for maximum resolution. Hardware units that require shorter files will automatically truncate 500ms files to the unit’s preferred length upon import.
    Natural Phase and Minimum Phase versions are provided.
    Fractal Audio™, Line 6™ Helix, Atomic™ Amplifire, and most IR loading amp modelers utilize 48k files.
    Kemper™ units ulitize 44.1k files.
    Strymon™ Iridium and BOSS™ units utilizes 96k files.

    VH+ 412 P50E WAV
    ♪ Download ♪


    Magesy® Related Post:

Submit a Comment or Report Broken Links:

Comments are moderated, Write Links Dead for Report | We can take 24 to 48 hours, you will receive an answer in your email when it has been re-uploaded! | (if there are mirrors working we will not reupload anything.)