• Pristine Peaks Ie V1.0.0 Win Mac R2r Magesy

    Pristine Peaks IE v1.0.0 WiN MAC

    Team R2R | 03 July 2023 | 50.8 MB

    Pristine Peaks IE is a streamlined version of our stereo Pristine Peaks limiter that has been enhanced and optimized for multi-channel surround and “immersive audio” applications. Pristine Peaks IE, like Pristine Peaks, is an ultra-low distortion peak limiter for use in both mixing and mastering applications where the transparent peak control is required. Pristine Peaks IE can support up to 12 channels of audio for use on mono all the way up to 7.1.4 channel-based audio tracks and buses. Each channel can be level-trimmed +/-5dB pre-limiter while their peaks can be trimmed as well by as much as 10dB below the master Ceiling setting. Channel Isolate and Bypass controls are also provided to allow channel monitoring and bus separations.

    Pristine Peaks IE uses a novel approach to dynamics control that produces a very “clean” sound that does not break up or distort even at high gain reduction amounts. Instead of saturating or clipping waveform peaks, Pristine Peaks IE determines what needs to be done to control the peaks and applies that gain change to the entire waveform. This results in extremely low THD for a very “clean” sound.

    PristinePeaks IE provides the following features:
    •Up to 12 channels of independent gain reduction
    •Less than 0.005% THD at any gain reduction amount (20Hz-20kHz)*
    •No aliasing*
    •-10dB to +20dB of pre-limiter global Drive gain
    •+/-5dB channel pre-limiter drive Trims
    •0 dB to -20dB global Ceiling range
    •0dB to -10dB channel Ceiling Trims
    •+/-15dB level Output control
    •Choice of two different release slope shapes
    •Peak hold meters that capture the max gain reduction•Independent Channel Isolation and Bypass buttons
    *Steady-state measurements

    Pristine Peaks IE v1.0.0 WiN MAC-R2R
    ♪ Download ♪



    MaGeSY® Related Post:

Submit a Comment or Report Broken Links:

Comments are moderated, Write Links Dead for Report | We can take 24 to 48 hours, you will receive an answer in your email when it has been re-uploaded! ☣️ (if there are mirrors working we will not reupload anything.)☣️ If you do not put a Correct EMAIL for the answer to reach you… we will delete your comments.


The web does not work well with Adblock or Ublock Please disable your ad blocker for MaGeSY®.
(You also need to have Javascript Enabled)