Rhino3 v1.3.3 WiN

Team R2R | 09 October 2026 | 401.63 MB

Hybrid FM synthesizer

Six oscillators per voice with FM, additive and wavetable sources, two multimode filters, drawn envelopes, an FM routing matrix, a step sequencer and four effect slots. Play it below, in your browser.

The engine
– The sources mix inside one voice: an FM pair can sit next to a drawn spectrum, and both run through the same filters and envelopes.

Six oscillators, a full FM matrix
– Each voice runs six oscillators. A source is one of the built-in waveforms or one of six wavetables you draw in the additive editor or derive from a WAV. Any oscillator can frequency-modulate any other, including itself, with exponential or linear scaling, and two ring modulators take any mix of the oscillators. Every oscillator has its own waveshaper.

Two filters, 26 modes
– Lowpass, highpass, bandpass and notch at 12, 24 and 36 dB per octave, three analog lowpass and highpass models, and comb, allpass, diode, transistor-ladder, Sallen-Key and SEM types. Each oscillator sends to Filter 1, Filter 2 and a dry bus in any mix, each filter can feed back into the other, and a waveshaper sits inside each filter loop.

Envelopes you draw
– Thirty-one of them: level, waveshape, pitch and phase per oscillator, cutoff, resonance and waveshape per filter, and a global pitch envelope. Up to 128 segments each, with curvature, a loop region and tempo sync. Keyboard tracking, velocity and aftertouch each have their own curve.

Effects
– Four effect slots with 24 types: two delays, six choruses, three ensembles, a flanger, a quad phaser, four reverbs, a granulator, CrazyComb, autopan, rotary speaker, ring modulation, overdrive and a three-band EQ.

INFO/DEMO/BUY: https://mage.si/rhino
Rhino3 v1.3.3 STANDALONE VST3 x64 WiN-R2R
♪ Download ♪